Want to get the best performance possible out of this stock cylinder. Plan on slightly widening the exhaust port, but not sure if I should take it back as well. Gonna read up on this in the performance books some more, but has anyone made any significant changes and seen good results? Gonna do the basics to the intake and exhaust (matching). Just not 100% sure if I should do anything inside except widen the exhaust port. Thanks
shaw did 60mph+ on a35 top end
Oh yeah?
Take it to a machine shop and have them mill 3mm off the top of the jug. Fab a 3mm spacer plate. worked for me 55mph w' phbg and a biturbo.
I've seen a really well ported a35 hit 46 but the rider swore up and down it went over 50.
Four year old thread guys...
So what.
700000000000000000 mph a35 for life
4 yrs old.. ya so what. get some clutch springs! they help tons with the bitubeo. shaws steady handy work on a "junk" cylinder more looks like some of the chainsaws I have rebuilt or even more the weedeaters that stihl and other use. (edited)
Want to post in this forum? We'd love to have you join the discussion, but first: