MOPED ARMY

my condolences

Cut the cylinder skirt off to the point of the end of the crack staight across like a more open transfer. then match it up on the other side.

Leave the part in the middle so the piston doesnt flop.

Bevel everything and dont leave any jagged edges then hone the living shit outta it.

Dont try to fix it it will just break off and get thrown around the crankcase.

paulvolio is right, just cut that off where the crack is. you don't need to repeat it to the other side to balance it though. enough of the skirt remains so that it will still be balanced enough. ive seen it work fine. those airsals crack there a LOT ive noticed. another option is to find somebody with an aluminum welder and actually weld the crack shut and then grind it down again/open up the case to fit the slight raised alumiwleds after you've filed them down. i dunno, theres a lot of options. good luck dude.

holy shit, i need more open transfers anyways!

They are powerful kits. I'm putting one on a za50 pretty soon.

oh yea, the skirt of mine is cracked and just taken off. Shit happens.

port it? Open your exhaust up.

If it's worth anything, my cousin is going to college for welding. He's one semester away from graduating with an Ass. degree. He's welded aluminum before and got good grades doing it. If you want it welded and don't know anyone who can do it, my cousin can. I don't know what price you'd be looking at shipping both ways, it probably would be better to just buy another kit, but I'm sure he'd do it for free.