whats a good air filter for a 19mm phbg carb 65 metra kit techno racing pipe? i was looking at http://cgi.ebay.com/ebaymotors/OKO-48mm-metal-air-filter-21mm-24mm-carburetor-moped_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el1262QQcategoryZ35597QQihZ012QQitemZ220312529960QQtcZphoto
but im not sure if it will work
I just put a malossi setup on a similar build. It's a tight fit, but it works:
I have the one you're looking at on my other bike. It's also a tight fit:
Oh...the filter in the second picture came from treats, but it had a 45ish degree elbow on it. It's not straight, so it isn't the exact filter from the ebay auction.
ok i was thinking about putting the carb and intake and filter out the front. not straight out front by on an angle
The link you posted was for an OKO carb. I am not sure whether the sizes are a good match. THe filter may be too big or too small for the PHBG. The clamp looks too big for the PHBG. There is a filter that looks like that for the PHBG, though I am not sure where you can buy it. Since there are plenty of filters for PHBG, you should buy one of those. I prefer filters that have some sort of foam element. I believe they are better at filtering the air than the mesh filter kind. I have the malossi 90 degree filter on my 65 metra/19PHBG/estoril setup and like it.
What intake are you rockin on that setup Jeremy?
malossi e8
i like my malossi 90
Chirsr: I am using cut and welded put exhaust with a spigot mounted PHBG
Thanks. I have a clamp style and posted a new thread about it...
Want to post in this forum? We'd love to have you join the discussion, but first: