Anymore performance Mods Out There?????

I was wondering if there are anymore performance mods out there here is a list of what I have done. Besides performance crank.

65cc Metra

Case Match

Case Induction

19mm Carb

Simo Carbon Pipe

Better Gearing

High Compression Head

Thats about it if you could help me out on my dream mofa that would be sweet. Thx

Re: Anymore performance Mods Out There?????

do some clutchwork?

Re: Anymore performance Mods Out There?????

open up the oil passages

bigger kit

bigger carb

bigger intake

ceramic bearings

lightened primary drive

knife the con rod

want me to keep going?

Re: Anymore performance Mods Out There?????

ahah keep going mike he will try it. im his roomate he will do those things to the puch it'll be beyond funny the amount of work that goes into it. yeah keep going

Re: Anymore performance Mods Out There?????

can you tell me how to open up the oil passages and lighten the drive shaft.

Re: Anymore performance Mods Out There?????

haha alright

port work

custom welded exhaust

cdi

lose some weight (you and the bike)

stuffed crank

larger wheels (for top speed)

smaller wheels (for quickness)

uhh, ceramic sealed bearings in your wheels

fairings

speed holes

take the baffle off your simonini

velocity stack

dual stage carbs

i could keep going, but i need more beer.

Re: Anymore performance Mods Out There?????

refill and please return. i gotta see this. hes been working on it for so long and when he keeps going its an ongoing source of laughter.

he cant lose weight he already a twig

speed holes? like black holes? acceleration of gravity near a black hole, now thats performance.

oooh good times =] good times =]

Re: Anymore performance Mods Out There?????

best thing you can do on that setup is get a 3 shoe clutch with paz springs. lighten each shoe by at least a couple grams. get a powerdynamo or hpi (prefered) internal rotor ignition and tune your clutch so that it engages at around the same RPM as the simo.

personally if you are looking to build a "race bike" the 65 metra is not the kit i would go with. it has great porting potential but it was designed to be a "stock replacement" cast iron, extra power, no worries. kits like the 65 polini, the parmakit, the gilardoni and others are "race kits" go fast till you blow up.

Re: Anymore performance Mods Out There?????

Case induction and a 65cc Metra don't exactly go together.

Re: Anymore performance Mods Out There?????

^^ it could be an endurance race bike. and they have the potential to be as fast, if not faster, than a polini.

^elaborate

Re: Anymore performance Mods Out There?????

Pablo Puchasso /

regear. No one said that right?

Re: Anymore performance Mods Out There?????

Pablo Puchasso /

Oop. He said that in the first post. I know one: let Shaw touch it. haha

Re: Anymore performance Mods Out There?????

advance timing

custom made exghaust

and port,port, port.

Re: Anymore performance Mods Out There?????

Fill yur tires with proper air pressure?

Sealed wheel bearings seem to really make a differanxe

Re: Anymore performance Mods Out There?????

I know this might sound a bit stupid, but has anyone considered filling there tires/inside of there frame with helium or hydrogen? I realize not that much weight would be lost, but I mean, when people go nuts over this shit, they start looking for like, that next 1/10 of a mph.

Re: Anymore performance Mods Out There?????

I think someone put lead shot in my tires instead of air...

Re: Anymore performance Mods Out There?????

keep your spokes tight it might not make u go faster but it helps your cornering speed and general comfort going fast.

Re: Anymore performance Mods Out There?????

haha helium in ur tires, lol wearing shorts vs jeans would be a similar improvement.

dude there is alot more u can do and most of it dosen't involve more parts.

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account