Gilardoni 2.0 vs 3.0

2.0 = at least 30% faster lol

Re: Gilardoni 2.0 vs 3.0

Powered by Treats.

Re: Gilardoni 2.0 vs 3.0

At this point, very true.

Metra v1.0 = still faster than both ;)

My gila is finally starting to show some signs of life, bt the end of the day it should be down to about 5-10% slower.

Don't worry though, I have secret inside treat information coming into bird land, and I'm not too worried. I know all about your daily GPS testing, and I heard you bike has no bottom end. :)

See ya soon kiddo.

Re: Gilardoni 2.0 vs 3.0

There are spies everywhere I tell ya!

For the record with the wrong jetting and no timing work Parma Ω hits 62. Don't you worry about bottom end either. Even at 45 she will not shift into second till you let off the gas.

This is going to be a fun weekend.

Re: Gilardoni 2.0 vs 3.0

Sounds like your spys are from Iraq CIA. mz informed, dude. you reed haters make me throw up!

Re: Gilardoni 2.0 vs 3.0

thats fucking insane paz.

Re: Gilardoni 2.0 vs 3.0

A cold wind will blow from the North

Re: Gilardoni 2.0 vs 3.0

Just what I heard brando, just what I heard.

I'm teasing though. I have no intention of being the fastest bike there, but I will have two motors that could keep me in the top 10. Which is a good feeling.

And I aint no reed hater. I have big hopes for the gila, I just have had no time to tune it. Yesterday was the first day I actually had any time to make adjustments. Hit the pipe at about 50 and started pulling hard. Today will tell whether I run the gila or metra depending on how well I can get it tuned. Shes starting to feel like a monster, which has gotten me motivated again.

Re: Gilardoni 2.0 vs 3.0

California talks big. Just wait.

Re: Gilardoni 2.0 vs 3.0

two words.

Souix Falls.

Re: Gilardoni 2.0 vs 3.0

go candy store, go!

Re: Gilardoni 2.0 vs 3.0

we wrench until you cant call it a wrench anymore, and then our shit goes fast, not to mention the HOME MADE pipes that arent even modelled after your market pipes.

Re: Gilardoni 2.0 vs 3.0

i got my moby to 60 today with lowend like a motorcycle, after slapping it together yesterday then we did a 70 mile marin ride.

I snapped my throttle cable half way thru and ran out of gas twice.

it won't idle, the jetting is all off cuz i just went with the 3rd jet i tryed (118, 100, 87 bingo) and haven't fucked with any of the carb settings

then at the very end the bike started to sputter, its got fucking cdi.... wtf.

there a mysterious gas spewing comming from somewhere, the doppler pipe baffel is rattling off, i shredded a red twizzler belt once and have to keep removing links to keep the epic low end.

anyways the low end is epic it get to top speed suoer fast, i'm gonna try and gear it out more.

o the variator isn't opening the whole way either, i thgink i have alot of work to do on it, alas but no time

fuck french bikes, u get one ride then shit hits the fan.... puchs are sooo easy, it should be ready for the rally tho. if all else fails its just gonna rip outta the hole and up hills.

fuck a gilerdonni too

Re: Gilardoni 2.0 vs 3.0

elliot, i had mysterious gas and it was coming out of the vent holes on the carb. i put breather nipples on it and ran hoses down near the ground, problem solved.

the doppler baffle is fragile and the perforated core snaps if you hit it too hard against your leg, against a door frame, etc.

Re: Gilardoni 2.0 vs 3.0

gila is awesome....when your coil is properly grounded. The 8p hits wayyy late with 16x36. oh and re-gear queers tall gearing for this rally is meh. I'm fine with gila 1.0.

oh and elliot...his bike rips, all of those secret peugeots im hearing about have a lot to live up to.

Re: Gilardoni 2.0 vs 3.0

I'm surprised you tore up a Fenner Drive belt, I think people forget to notice they are directional and take proper alignment of the pulleys.


Re: Gilardoni 2.0 vs 3.0

haha my pulleys are not aligned at all because at full variation the belts in a different location then at low speed so i never bother. I did align a bike once that was shredding belts over and over and it helped some, but i suppose i could align it more so at full variance its perfectly aligned... might be a good idea, yeah.

also i might have put it on backwards that time, who knows.

that bike is only at like %70 potential right now... it needs mucho attention, i took it on that ride to make sure the motor was solid.

mopeds are fun to ride.

o and it gets like 10 miles per gallon so something ridiculous like that.

Re: Gilardoni 2.0 vs 3.0

o and to keep this on topic.. ur gila's anit got shit on my moby.

even if ur a few miles per hr faster its gonna take u so long to catch any supervariated bike (peter,rufus,secret peugeots,me) the bridge will have ended...

i might let u pass me in the mt.'s just so i can give u a proper blasting a minute later up hill.


let the shit talking begin!

Re: Gilardoni 2.0 vs 3.0

i wish i could go to SF and get my ass blasted by you losers. Fuck a small port metra. :/

Re: Gilardoni 2.0 vs 3.0

Woof. I'm done. Just bringing old faithful, and hanging with the top pack and having fun watching the rest of you battle it out. This motor has been nothing but pains from the start.

Looks like you guys are gonna have to wait till Feb to see what LA has to offer. No secret puegoets and no gila's. :(

Re: Gilardoni 2.0 vs 3.0

also wont make an appearance until the LA rally.

i blew it, cant swing SF. sorry guys.

Austin and LA are a sure thing!

Re: Gilardoni 2.0 vs 3.0

my ciao sucks :(

Re: Gilardoni 2.0 vs 3.0

fuck! a magnum!!!!

Re: Gilardoni 2.0 vs 3.0

) Cupermcnewbster ( /

polini power!

Re: Gilardoni 2.0 vs 3.0

tommy you had me worried for a second i had to upgrade but i don't even think i need this:

for mk vs gila.

yeah yeah french and italian power is more killer in the right hands for sure and if you have the right stuff and can't beat puchs you just suck!

za rpm potential isn't there good luck paz and polini is cool for the ladies and I haven't heard of anything fast expect a ciao of late which no one will even touch. i think mid range/variated bikes will dominate all weekend and Team TREAT, there's too many hills for top end bikes. super Tall gearing will get you left behind.

Magnum will Fuck YOU when you drop your trowsers again!!!

Re: Gilardoni 2.0 vs 3.0

put on the oko it!!

oh man i wish i could be at the SF rally...

Re: Gilardoni 2.0 vs 3.0

variators will dominate, but I'm not too worried about my metra in the hills. As long as I get going and int have to drop below 30 and fall off the pipe old faithful will be up there trying to chomp on the back tires of Rufus and elliot.

I'm glad I'm done with the gila for now and just be stoked to ride with everyone. See ya soon suckers. ;)

Oh yeah, fuck a polini. Tomos kits ftw. My girls bike is gonna blast all the polini fools.

Re: Gilardoni 2.0 vs 3.0

LOL brandon

"za rpm potential isn

Re: Gilardoni 2.0 vs 3.0

Haha. I kid Paz. I know it wont blast a gnarly polini. I didnt port it that gnarly myself, but For 200 less than a polini, it will probably blow MOST polinis out of the water. It wont touch elliot or benji'sor other super crazy polinis.

Re: Gilardoni 2.0 vs 3.0

you dudes better post some vids of this match up. All this shit talking and what not..

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account