Re: too late then

No Good /

Go to branch

Aug 01, 2008 03:14PM

This single post is part of a larger thread. Start from the top or view this post in context.

common sense: a blunt object opossed to a nice slopping smooth edge will have less resistance and have less turbulence. done

i've done it on all my kits and my e50 does over 65 at over 11000rpm, theres my proof

Subject	Written By	Posted
bridged transfer portsTopic by: Kansas John	Kansas John	07/31/08 04:08AM
Re: bridged transfer portsRe: No Good	No Good	07/31/08 04:14AM
Re: bridged transfer portsRe: No Good	No Good	07/31/08 04:17AM
Re: bridged transfer portsRe: Kansas John	Kansas John	07/31/08 04:31AM
too late thenRe: Fred Melonhead	Fred Melonhead	07/31/08 01:36PM
Re: bridged transfer portsRe: Kansas John	Kansas John	07/31/08 04:33AM
Re: bridged transfer portsRe: Mike Bartell	Mike Bartell	07/31/08 01:14PM
Re: bridged transfer portsRe: Fred Melonhead	Fred Melonhead	07/31/08 01:30PM
Re: too late thenRe: No Good	No Good	07/31/08 04:33PM
Re: too late thenRe: Flagrant -	Flagrant -	07/31/08 05:52PM
Re: too late thenRe: naz	naz	07/31/08 06:15PM
Re: too late thenRe: Fred Melonhead	Fred Melonhead	08/01/08 01:50PM
Re: too late thenRe: noogie	noogie	07/31/08 05:32PM
Re: too late thenRe: Kansas John	Kansas John	07/31/08 07:28PM
Re: too late thenRe: No Good	No Good	08/01/08 12:13AM
Re: too late thenRe: No Good	No Good	08/01/08 03:14PM
Re: too late thenRe: No Good	No Good	08/01/08 03:24PM
Do it.Re: Josh G	Josh G	08/01/08 10:28PM
Re: Do it.Re: Chris Paz	Chris Paz	08/02/08 12:13AM
Re: Do it.Re: ERIC WOOLF	ERIC WOOLF	08/02/08 02:18AM
Re: Do it.Re: Air Bud	Air Bud	08/02/08 02:50AM

Subject

Written By

Posted

07/31/08 04:08AM

07/31/08 04:14AM

07/31/08 04:17AM