I must have missed something because when it runs the
headlight is low when its at wide open throttle as if it was
@idle. The horn is very faint. Tail light barely registers...
brake light doesnt fire. All worked fantastically before
putting in the CDI. Please help
Patrick
well if its really week check the ground on the lights or maybe the cdi box isnt puting enough power out or its bad
Ground is fine...CDI is brand new. Changed out bulbs as well
Just cleaned up the wires abit..does wonders i tell you.
what do you mean cleaned up the wires?
quick strip and snip..the connect was probably dirty or something..
I am also having a hard time getting the lights working properly with the cdi installed. I was thinking it would be alot easier if i just re-wired the whole lighting system in a way that makes more sense (tail/break lights off of blue & headlight/horn from yellow) Would there be any issues in doing this or is their a reason that its wired so crazy??
Im betting alot of you are forgetting to ground out a coil. Look in the Wiki, simple
if the coil isn't grounded, you wouldn't have lights at all. are you using the green noi cdi from Ed? are you using the stock lighting coil or did you switch over your old ignition coil to the light side? that's really the only way to go...
Want to post in this forum? We'd love to have you join the discussion, but first: