A few more photos of the teardown and clean up of parts. I will not be using the stock Gurtner carb and have purchased a Dellorto SHA 15 and the new manifold. The speedo drive unit was trashed and frozen solid and the speedo was stuck. A new drive was purchased and the speedo taken apart and cleaned and after a good number of days soaking the lower half in Acetone and then using Breakfree CLP, it spins freely now. I cleaned all the carbon out of the muffler as well as a mud wasp nest in the tail pipe and surprisingly the chrome polished up like new. All the cables will be replaced as well as a new Variator, drive belt, tires and tubes.