started a new topic as i have the old topic under control but this topic may be what stops the rest of the repair. i took out the reed valve and i posted on the picture on the other thread but i will post that one here along with the other as i think someone put in a different reed valve and it is not seating well on the housing. and that may be what is causing the problem. so if i get a good enough photo maybe some here can direct me to a good part or a possible repair of this part.
this one has a bit of a detent downwards and the reed valve that is in it does not seat well. so is there a way to fix this housing? when i crank it over i get a ton of blowback thru the carb, so if it is pushing all the mixture back out it is ot very likely it has enough mixture to start. it will just about start with either. i have to post again to finish reached the max on this one thanks