I finally had the chance to try my kinetic. All I did was to install a new base gasket using gasket paper and coating it with a dab of gasket maker on both sides. First kick and it started right up. The compression seems to be still low just by feeling the power on the engine while driving it. I cleaned everything super nice in the whole moped but still having the low compression. Tomorrow I am going to do another compression test, just to see if there is a difference. Another weird thing is that is leaking lots of gas through the exhaust. I noticed this while pedaling to start it. The gas was being expelled all the way back through the exhaust like if the carb is directly connected through the exhaust. I tried to put my hand in the exhaust hole and my hand got all wet from the gas. The weird thing is that I was revving it and still working. I even cruised around the neighborhood until the leaking stopped. Any ideas why this is happening? Regards!!!.