Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lids

Graham Motzing /
This single post is part of a larger thread. Start from the top or view this post in context.

Very cool, I've been running a lot of functional parts out of petg lately. If you use sem trim black on it, it comes out with a really nice OEM 'raw black plastic' finish that isn't too shiny.

It's beside the point but my trick for the switch bases for years has been plastic welder epoxy and a dab of weatherstrip adhesive between the switch and the bar. I use the same adhesive for gluing down hand grips. That way you don't have to get them asshole tight and crack them. Even the most perfect factory ones will crack if you wrench them down.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsTopic by: Deadped Ryan Deadped Ryan 08/05/20 12:54PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Beach Club Nick Beach Club Nick 08/05/20 01:08PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Deadped Ryan Deadped Ryan 08/05/20 01:31PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Beach Club Nick Beach Club Nick 08/05/20 01:35PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Daniel '' Daniel '' 08/05/20 02:05PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Daniel '' Daniel '' 08/05/20 01:27PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Deadped Ryan Deadped Ryan 08/05/20 01:34PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: James P James P 08/05/20 02:14PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Deadped Ryan Deadped Ryan 08/05/20 02:51PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Mike Boyd Mike Boyd 08/05/20 03:18PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Born to be WillD Born to be WillD 08/05/20 04:20PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Deadped Ryan Deadped Ryan 10/20/21 11:33AM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Graham Motzing Graham Motzing 10/20/21 05:42PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account