Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lids

Daniel '' /
This single post is part of a larger thread. Start from the top or view this post in context.

I wasn’t trying to knock your stuff, sorry if it came off that way. It was pre coffee. I’m super thankful you have made all of these awesome products for us less than capable. Though every set I have installed split eventually, they never quite snug up enough to not slip. I had a couple customers bikes go out with them not split and come back broken. I wasn’t super bummed, i just squirted some super glue Into them. I can live with the loose base as opposed to a dangling switch, but there is definitely a need for sturdier bases. I will definitely be picking up a set or two of the aluminum ones.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsTopic by: Deadped Ryan Deadped Ryan 08/05/20 12:54PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Beach Club Nick Beach Club Nick 08/05/20 01:08PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Deadped Ryan Deadped Ryan 08/05/20 01:31PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Beach Club Nick Beach Club Nick 08/05/20 01:35PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Daniel '' Daniel '' 08/05/20 02:05PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Daniel '' Daniel '' 08/05/20 01:27PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Deadped Ryan Deadped Ryan 08/05/20 01:34PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: James P James P 08/05/20 02:14PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Deadped Ryan Deadped Ryan 08/05/20 02:51PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Mike Boyd Mike Boyd 08/05/20 03:18PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Born to be WillD Born to be WillD 08/05/20 04:20PM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Deadped Ryan Deadped Ryan 10/20/21 11:33AM
  Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lidsRe: Graham Motzing Graham Motzing 10/20/21 05:42PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account