Re: PETG 3D Printed Magnum Side Covers and Trunks + NS50 trunk lids

Deadped Ryan /
This single post is part of a larger thread. Start from the top or view this post in context.

> Daniel '' Wrote:

> -------------------------------------------------------

> If the stock screws don’t work and break the printed bases, I would

> consider including a set that do work.

Daniel,

The stock screws work fine when I've used them. The last sets I sent, I included screws pre-installed. I used an electric drill to install 120 screws (two screws on 30x left and right), wasn't careful and had zero of them crack. I sent spare screws to treats but unsure if they got listed.

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account