A big O.K. I made a new thinner shim from a washer that I drilled out and filed down and it works great. I don't know what I would do without this forum. It can make an expert out of anyone who has a little mechanical ability. I only wish that treats would put that information out when a person buys a new crank. There is nothing like experience.
Thanks Fellows.
I will check back in when I get it all back together and running.
| Subject | Written By | Posted |
|---|---|---|
| Large spring clip on starter plateTopic by: Bill Donati | Bill Donati | 07/31/20 05:24PM |
| Re: Large spring clip on starter plateRe: Papa _ | Papa _ | 07/31/20 05:50PM |
| Re: Large spring clip on starter plateRe: Mike Boyd | Mike Boyd | 07/31/20 06:43PM |
| Re: Large spring clip on starter plateRe: Bill Donati | Bill Donati | 07/31/20 08:15PM |
| Re: Large spring clip on starter plateRe: Papa _ | Papa _ | 08/01/20 04:08AM |
| Re: Large spring clip on starter plateRe: Bill Donati | Bill Donati | 08/01/20 12:51PM |
Want to post in this forum? We'd love to have you join the discussion, but first: