CNC machine shop.

Rosta Stransky /

I like to help moped owners. I can make hard to find parts by reverse engineering. You provide old broken part and I make new one just like it.

IMG_20191122_143016519.jpg
IMG_20191108_120708954~2.jpg
IMG_20190323_061739558.jpg

Re: CNC machine shop.

Make me jammer clutch for a tomos a35 for second gear like dream team tuning did look at there Facebook for pics of what I'm talking about

Re: CNC machine shop.

Rosta Stransky /

Looks like somebody is already on it. Nice product.

Re: CNC machine shop.

todd amundson /

> Rosta Stransky Wrote:

> -------------------------------------------------------

> Looks like somebody is already on it. Nice product.

I'd like to see that?

The problem I found with dream teams second gear KTM look alike Is that the pads are completely custom and squat. They're also narrower, not so wide as a true KTM pad. A designer is limited by the large center section of the hub itself. Also a KTM bell is not as big in circumference as the TOMOS bell so pads need to throw out further if they're straight up put in the A35 bell.

Oh and there's the Hammer/Jammer thing?

Re: CNC machine shop.

well i have no idea what any of those parts would be used for - is that a weed grinder?

Re: CNC machine shop.

Ha . Weed grinder ... I can only imagine . ;)

Re: CNC machine shop.

Make a batch of these. Front wheel drive gear for speedo on Yamahopper QT50. Very hard to find anywhere.

20170818_202120.jpg
20170818_183414.jpg

Re: CNC machine shop.

Rosta Stransky /

Where is it located?

Re: CNC machine shop.

Rosta Stransky /

I will look into it

Re: CNC machine shop.

Rob LaFreniere /

I have a new-old-stock speedometer gear, if you would like to borrow it.

Re: CNC machine shop.

Rosta Stransky /

Thanks Rob. I am going to get one from my qt50. See if it's any good.

Re: CNC machine shop.

Inside speedo drive on front wheel. When a speedo stops working its because this gear gets stripped from lack of lube or improper installation. Searching internet with part number will yield zilch. I had to buy used a couple years ago and wouldn't mind having a spare. Throw some on eBay with correct part number and I bet they sell.

Re: CNC machine shop.

Re: CNC machine shop.

Rosta Stransky /

So rather than 3D printing, I like to machine these gears from solid material. That will require 5 axis machine. So I am currently looking into it.

Re: CNC machine shop.

Rosta Stransky /

Just made some. Will be making more soon.

IMG_20191229_073143219.jpg

Re: CNC machine shop.

Put me on your list for one. Might as well have a spare.

Re: CNC machine shop.

That came out great!

Re: CNC machine shop.

Rosta Stransky /

Thanks.

Re: CNC machine shop.

Rosta Stransky /

> Bob Naske Wrote:

> -------------------------------------------------------

> Put me on your list for one. Might as well have a spare.

Will do.

Re: CNC machine shop.

Excellent work. I want one too.

Re: CNC machine shop.

Rosta Stransky /

Any Suggestions for fair price?

Re: CNC machine shop.

Last guy that made them was getting$20, no? $20-25 seems fair. But its your time, work and materials in the end.

Re: CNC machine shop.

Rosta Stransky /

Selling speedo gears now on eBay.

Re: CNC machine shop.

Re: CNC machine shop.

Rosta Stransky /

Thanks PD.

Re: CNC machine shop.

Just got my speedo gear from him thru ebay. Excellent quality. Honest seller. No monkey business with shipping. If you need one buy one, if you don't need one but have 1 or more QTs get one for your spare parts stash.

Re: CNC machine shop.

Rosta Stransky /

Gear is machined on 5 axes cnc mill.

IMG_20200107_093654004.jpg

Re: CNC machine shop.

Very cool. I got one myself and I'm impressed with the quality. I dare say these are better than original. Get one now if you have the QT50. Who knows, these might even fit other Yamaha peds too. I got your pm Rosta and Yes I will be emailing you with another hot ticket idea for Garelli this time.

Re: CNC machine shop.

> live ɘvil Wrote:

> -------------------------------------------------------

> I will be emailing you with another hot ticket idea for

> Garelli this time.

Why not post that idea here and email Rosta ?

Re: CNC machine shop.

Rosta Stransky /

Thanks.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account