Just a 60cc kit (niche) and miniky clone carb. Thanks for the tip on the 5 pack. I do have a 75 and will try that first. I notice that the Mikuni jets are a little higher than the one pulled out of the clone. I'm sure that has an effect.
It can't be the stator wire because I actually was able to use the stock wire and it is a pretty tight fit. I de-soldered it from the original coil and soldered it to the terminal on the new coil. Maybe the wire for the ground is somehow sticking up? I'm sure I'll figure it out when I see the scratches. My PW coil looks different than yours.....and it came broken j(no big surprise). I had to epoxy the plastic end that has terminals. I will post a picture of it tomorrow when I pull the flywheel off.