Hi, can you help me with finding this part? It goes in to the cylinder it is a decomp valve and some piece of thin steel part is broken and missing on the opposite side of the thread. Here is the picture:
Kreidler MP2 1972 - 1975 part is broken
Re: Kreidler MP2 1972 - 1975 part is broken
Replace it with a bolt. Its really not needed and they're prone to leaking which can leave you stranded.
Re: Kreidler MP2 1972 - 1975 part is broken
https://www.1977mopeds.com/Sachs-Decompression-Valve-p/53.htm
Looks like they removed my review, this is for a Kreidler.
Re: Kreidler MP2 1972 - 1975 part is broken
> Downhill Harvey (OFMC) Wrote:
> -------------------------------------------------------
> https://www.1977mopeds.com/Sachs-Decompression-Valve-p/53.htm
>
> https://www.1977mopeds.com/v/vspfiles/photos/53-2.jpg
>
> Looks like they removed my review, this is for a Kreidler.
Thanks a lot! can you tell me is this one will fit also? this one is a new part,
https://www.lucky2strokes.com/Sachs-504-505-Decompression-Valve-p/sachs-decomp-valve.htm
Re: Kreidler MP2 1972 - 1975 part is broken
Just in case you'd want to know, you can buy OEM parts from Kreidler in Germany.
This past winter I fixed up an MP-19. Had no trouble ordering every single part my heart desired, brand-new, from Kreidler. I looked up all the parts I needed on their website to get the part numbers. Then I emailed my list. They sent me a proforma invoice. I paid them with PayPal and 10 days later I had a big box of parts from Kreider. Easy peasy.
One of the parts I ordered was, by the way, a new decomp valve. It wasn't cheap at about $35 USD.
Prices for the most part weren't bad. One place here in the USA wanted to sell me a used engine side cover for $50. I bought a brand-new one from the factory for $40. Granted I paid the steep German tax and shipping but it was still worthwhile as I ordered quite a pile of parts.
https://www.kreidlerdienst.de/de/ (edited)
Re: Kreidler MP2 1972 - 1975 part is broken
thanks for the info, I found everything on their site in Germany!
Want to post in this forum? We'd love to have you join the discussion, but first: