Re: Clutch Bell Bushings for Punjabi Garbage Pile

DrGeorgeTompson (Alan) /
This single post is part of a larger thread. Start from the top or view this post in context.

> Frank Bailey (MOPITT) Wrote:

> -------------------------------------------------------

> I'd trim the Puch bushing.

Im leaning on doing this. I ordered the China bushings but they won't come in for a month.

How can I do it though? Just Mark it and grind it or sand it? I think I'd have to attack it from both sides because just removing one side would put the holes very close to one side and I'd like to keep the big holes in the center.

I'll probably end up getting impatient and doing this anyways.

The current bushing is very copper colored but it's service life has been shit apparently.

Edit: also im not sure what the bushings I ordered will look like. It was just a generic photo. Im assuming they will be similar to the one attached (edited)

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account