looking for solution for intake tube for 1980 Indian AMI-50

travis Mo /
This single post is part of a larger thread. Start from the top or view this post in context.

I just picked up a 1980 Indian AMI-50 in pieces but mostly complete for $50. The carb I have is the Mikuni but it is shot. I ordered the suggested replacement on the wiki and it has a flange style carb mount instead of the clamp. In short Ive been searching for an intake pipe that has bolt hold spacing of 32mm on the carb end and 35mm on the cylinder end. OR is there an adapter available so i can use the pipe i have? I've seen a bunch that were much larger but none with 32mm spacing for bolts. I feel like there should be something available but i'm just looking in the wrong place. Im pretty new to mopeds, but id love to get this thing going! Any ideas or a point in the right direction would be greatly appreciated.

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account