I decided to just try hooking up a aftermarket coil to the bike with out doing the Myron Moped coil cut mod.
Clamped a good aftermarket coil to the frame and hooked an orange wire clip lead to the signal tab.
Screwwed out my spark plug and clamped it to the head and clipped on the aftermarket plug wire so I could look for spark
attached the other end of the orange clip lead to the blue wire coming out of the three wire rectifier.
Then I pulled on my pull rope and whoh! I had spark like crazy. Thought I better go out and test ride it. Took it out to the porch and tried to start it but it would not even try to start. Gave it like 10 good pulls.
Then I bent down and removed the clip lead from the blue wire and reattached the stock plug boot and it starts right up.
Switch back to the aftermarket set up and NO START.
I pull the plug and reclamp it to the head and pull the rope and I have tons of spark. But the bike wont start.
Head scratching now.