Im new on here and thought I'd open up with an idea about repairing the fuel tank on a Maxi (if no one has tried it before).
I have a small hole at the bottom Of The tank which is in the frame where no one can get to!
My idea was to cut the weld between the tank and the rear frame section to retract the tank from the frame, do the welding repairs(holes) And re joint the the tank and frame then weld it back together?
I don't have many options really so will probably do it anyway. I want to cut the very bottom Of The tank off anyway to have a proper look at what's happening in there.
Let me know if anyone had had a go at doing this.