Re: Replacing bearings and seals

Moped Lar (OFMC) /
This single post is part of a larger thread. Start from the top or view this post in context.

The crank may feel a little stiffer after new bearings and seals. Make sure to coat the seals and bearings with 2 stroke oil before replacing. I'd run your pre-mix at least 40:1 for the first couple hundred miles.

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account