Re: Morini mo2 countershaft bushing

Forums / Repair

New Topic Go to Topics

Don Ohio /

Jul 21, 2014 11:23PM

This single post is part of a larger thread. Start from the top or view this post in context.

I've never worn one out,but then I've never run one without enough good,clean oil.

You can make a bushing out of copper pipe as a last resort,just leave a slight gap so oil can get in there.

Should be able to find one and match it(length not important as you can cut it) up by searching the net. don-ohio

This single post is part of a larger thread. Start from the top or view this post in context.

Subject	Written By	Posted
Morini mo2 countershaft bushingTopic by: Christopher Jones	Christopher Jones	07/21/14 11:14PM
Re: Morini mo2 countershaft bushingRe: Don Ohio	Don Ohio	07/21/14 11:23PM
Re: Morini mo2 countershaft bushingRe: Christopher Jones	Christopher Jones	07/21/14 11:56PM
Re: Morini mo2 countershaft bushingRe: Don Ohio	Don Ohio	07/22/14 12:15PM

Want to post in this forum? We'd love to have you join the discussion, but first: