Re: Delorto no idle - idle circuit

Bill W /
This single post is part of a larger thread. Start from the top or view this post in context.

Use a pin, needle or thin wire to clean out the idle jet , THEN use carb cleaner or WD40 and blow it out with compressed air.

You have to remove the plastic insulator to access the Idle jet

1158648580_dell_orto_carb_idle_jet.jpg
This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account