Peirspeed Cheetah XS

Hi, I own a Peirspeed Cheetah XS that I bought last October. I can not get it to start. It has less than 600 miles on it. I've bought a new spark plug, battery, and checked the fuse. The engine still will not turn over. It has plenty of gas and oil. Does anybody have any suggestions on what else to check? Thanks a lot.

-Brian

Re: Peirspeed Cheetah XS

Is this a moped or a scooter?

When you say that it will not "turn over" do you mean that the engine will crank on an electric starter but not start?

Have you checked all the wiring to ensure that all circuitry is OK?

Re: Peirspeed Cheetah XS

It is a scooter. Sorry if it the wrong forum to ask this question. That is correct. It will crank on the electric starter, but it won't start. I've also tried to kick start it, but it still will not work. I really don't know anything about the wiring of it, so I wouldn't know if that is OK. Is there anything relatively simple to check? Thanks again for your help.

Re: Peirspeed Cheetah XS

A lot of newer equipment has a run/stop switch on the handlebar. Have you checked it?

Have you pulled your sparkplug and checked it for a nice spark when you are cranking the engine?

Re: Peirspeed Cheetah XS

Yes, mine has a switch and it is in the correct position. I replaced the old spark plug even though it had a spark and I confirmed the new one had one also. I don't know what else to check.

Re: Peirspeed Cheetah XS

squirt some Starter Fluid in there.. if it starts, ignition is ok but the fuel system has a problem.

Re: Peirspeed Cheetah XS

I tried starter fluid and it didn't work either....

Re: Peirspeed Cheetah XS

i have 2 cheetahs.. they have a bad habbit of clogging the carbs up when they sit. Also US models are restricted to 35mph but they will do 50mph if you change the front clutch.

Re: Peirspeed Cheetah XS

I just bought a cheetah and my bro wrecked it. He ran it straight into a pole, istill can't figure out how he pulled that off but if anybody knows where I could get parts that would be great or I might be willing to sell mine for the good parts. I straightened the front end the best I could and it works but it's not 100%

Re: Peirspeed Cheetah XS

For right price, I may be able to buy 'parts scooter'. How much U want?

Re: Peirspeed Cheetah XS

> Donald Clay Wrote:

> -------------------------------------------------------

> For right price, I may be able to buy 'parts scooter'. How much U want?

After 7 years , you might get real lucky and get an answer . ;)

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account