stronger spark wanted

Steve Mccui /
This single post is part of a larger thread. Start from the top or view this post in context.

I read in a reference moped repair manual that a if I put a screw driver in the spark plug wire (holder) and turn the moped over by hand I should see a spark jump 3/8 on an inch to the head. I get 1/16 of an inch. I have alread put in new points and condensor and set points.

This bike sat for 5 years and there was rust on fly wheel and coil pick ups, and in general area. cleaned up with emery paper ect...

What next, I have a multimeter, what should I do?

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account