Headset bearing cups

Jerry Kaidor /
This single post is part of a larger thread. Start from the top or view this post in context.

Hello,

A few nights ago, my son ran his nice '79 Puch Maxi over a piece of wood. Son and Maxi went flying, and when all came to rest, the son was bruised up and so was the Maxi.

The front forks were bent just enough not to work anymore, and the front wheel was bent & wobbly. Also, the tail light cover had broken loose of its pod.

$120 later, we had a fresh front fork assembly. On attempting to install it, we found that the headset bearing cups, both top and bottom, were cracked. I tried to

silver braze them up, but am not happy with the results.

If I absolutely have to, I could make up a pair of new cups on my lathe, but I really don't want to.

Anybody have a pair of usable bearing cups? Or know of a source for same? A good front wheel rim would also be nice.

Thanks in advance,

- Jerry Kaidor

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account