i have a '78 puch mkII and it was doing the same thing. i had switched the carb from a 12mm to a 17mm and even though i had a new air filter and such on, the main jet was too big. we put the 12mm carb jet in the 17mm carb and it helped. then my friend used a drill index to make the jet a little bigger. after every size increase we put the carb back on and tried it. now it can go full throttle without sputtering or dying out.
Re: PUCH HELP
This single post is part of a larger thread. Start from the top or view this post in context.
This single post is part of a larger thread. Start from the top or view this post in context.
| Subject | Written By | Posted |
|---|---|---|
| PUCH HELPTopic by: Asdf Sdfg | Asdf Sdfg | 06/11/04 08:27PM |
| Re: PUCH HELPRe: Joe Woods | Joe Woods | 06/12/04 07:07AM |
| Re: PUCH HELPRe: Gregory Mcintire | Gregory Mcintire | 06/12/04 08:42AM |
| Re: PUCH HELPRe: J Davison | J Davison | 08/15/05 05:59PM |
Want to post in this forum? We'd love to have you join the discussion, but first: