" I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br> Can ship parts UPS. E-mail with needs.<br> Scott H"
" I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br> Can ship parts UPS. E-mail with needs.<br> Scott H"
": I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br>: Can ship parts UPS. E-mail with needs.<br>: Scott H<br>I have 1977 Puch Maxi, 1977 Newport I am looking for a a moped with papers doesnt have to be the exact "
": I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br>: Can ship parts UPS. E-mail with needs.<br>: Scott H<p>I need a front wheel and fork for my 1980 puch"
I have a Maxi and I despritly need parts<p>
": I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br>: Can ship parts UPS. E-mail with needs.<br>: Scott H<p>"
": : I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br>: : Can ship parts UPS. E-mail with needs.<br>: : Scott H<p>I need a rear axle and bearing cones for a 1977 PUCH maxi"
I need the part that leads from the carb. to the piston on the maxi's. mine crumbled. How much and what is it called?<p>
do you have a piston and rings for a 78' magnum?<p>or know where i can but a new one?<p>
I am looking for a throttle cable for a 1980 Maxi. Any clues whare I might be able to find one new or used?
": I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br>: Can ship parts UPS. E-mail with needs.<br>: Scott H<p>I need a carborator for a 1979 2hp Puch. I'm not sure of the modle number, but I have the VIN #"
"1976 250ccMX PUCH<p>I AM LOOKING FOR ANY PARTS FOR A PUCH 250MX, THE YEAR IS SOME WHERE BETWEEN 1975-1977. I HAVE FOUR OF THIS BIKES AND WOULD LIKE TO GET THEM RUNNING. PLEASE LET ME KNOW IF YOU CAN HELP OR KNOW IF ANY OTHER PERSON, COMPANY HAS PARTS <p>"
<br>: I am looking for a throttle cable for a 1980 Maxi. Any clues whare I might be able to find one new or used? <p>I may know where there might be a new one. My stepdad owened a dealership in the 80's and we have tons of old puch stuff. I will look an
": I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br>: Can ship parts UPS. E-mail with needs.<br>: Scott H<p>"
": I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br>: Can ship parts UPS. E-mail with needs.<br>: Scott H<p>"
": I have a puch maxi 1979 with a 2hp. I need the smaller bearing in the clutch/tranny assembaly. the dimmentions are 10mm inside and 28mm outside,<br>if you have this e-mail me back . thanks alot.<br>jake<br>: <p>"
: : I have a puch moped 84 and need a coil to start it .it went out an i cant find it at anystore if you have one that works to give or sell for $20 just e-mail me soon as possible thanks <p>
"I have a '78 PUCH MKII.... I was looking for parts myself (and any operating/service manuals). <br>If anyone had some luck I hope you are<br>willing to share your findings. Any help you could give would be<br>greatly appreciated.<p>I live in Houston, Tex"
": : : I have about 5 Puch parts bikes. There is a Magnum, 2 Maxi's, and a couple 1hp models.<br>: : : Can ship parts UPS. E-mail with needs.<br>: : : Scott H<p>: I need a rear axle and bearing cones for a 1977 PUCH maxi<br>: I need a throttle cable and"
"Did you find any Puch parts from your stepdad's dealership? My 72 year old mom still drives her old Puch, but it needs an engine rebuild. Any chance you have a gasket kit, rings, bearings, piston, cylinder, etc. I think this poor bike has about 15,000"
"I have just bought a 1978 Puch Maxi. It is really clean (owned by an elderly couple).<p>It does need a throttle cable. Please let me know parts sources for this.<p>Any info on it would be appreciated. Horsepower, MPG, etc. <p>Thanks,<p>bnyquist@yahoo.com"
I need the switch that stops the gas from moving from the carb <p>
pARTING OUT A 1980 PUCH MAGNUM 2
Hi Scott, i need a throttle cable for a maxi if you have one please let me know how much. thanx.
if you could i would like if you told me what kind of spark plug your Moped takes. Please E-mail me at figmentofmyownimagination@hotmail.com
Want to post in this forum? We'd love to have you join the discussion, but first: