MOPED ARMY

Heck I might be coming down for this so I’ll throw up some things for sale.

Purple 1975(?) maxi roller. Pretty clean, throw a motor in and go kinda deal minus tires. Can’t remember off hand the exact year but one of the first in Canada.

Asking $100 for it.

E50, was told by someone it was rebuilt. Got digging into it. It more looks like it was rebuilt with spares. But it needs hardware and rings.

Asking $75 for it.

Zündapp type 249-02 engine. As far as I’m aware it’s the only one in Canada as the bike it’s off of never left Europe from my understanding. It’s a variator style engine. Currently missing variator and electronics. Same electronics though as Hercules from what I can find. Has some mild porting done to it. Mostly widen the ports not adjusted port timing. Be the talk of the club with a super unique engine.

Make a fair offer. Spent $250CAD getting it from Germany.

Got a bunch of misc. parts that I’ll probably through on at $5 a piece that are pull off parts.

So I will say I just picked it up from my friends shed the purple puch. I had to semi disassemble it to fit in the car. But the missing wheel and seat and hand bars are coming with it. And I also have the side covers to go with the roller. Will need a good clean up but I will do that before I bring it to the swap meet. The vin has also never been registered so not sure if it makes it hard to put in the name in the states. But easier atleast then switching from Canada to states.

andy, i will buy your e50

ian, i will buy both your maxi roller and your e50

Planning to be there, looking for a Peugeot BB engine, "66 Peugeot Super Sport primary drive bits, a straight Maxi/Magnum rear snowflake and some Hobbit bits...

So far.

Can anyone bring the purple maxi roller and e50 back to columbus? I can pay.

We might have some, I'll check at the shop

I got some rando shit

I’ll have to get out in the garage and go through some boxes to see what’s still there and what I’m missing.

I’ll be coming from Detroit Moped Works and can bring whatever folks want.

Best way to reach out with parts requests would be DMing the shop FB and/or filling out the website contact form; that way the whole staff gets it / can go parts hunting for you.

Thanks

Alex Samul

Owner

Detroit Moped Works

5407 Michigan Ave

Detroit, MI 48210

E-mail: sales@detroitmopedworks.com

Website: detroitmopedworks.com

Facebook: https://www.facebook.com/DetroitMopedWorks/

Instagram: https://www.instagram.com/detroitmopedworks/

Youtube: https://www.youtube.com/detroitmopedworks

Shop Phone # (313) 502-8198

I have a Hobbit roller, no subframe - rear wheel also included but not in pic, $200

If I still have the Vespa Si Chopper project (holding for someone till Jan), $250

https://www.mopedarmy.com/forums/read.php?2,4562632,4563320,flat=1#msg-4563320

Morini MO2 - $200

https://www.mopedarmy.com/forums/read.php?2,4560269,4565913,flat=1#msg-4565913

Complete Moby $1000

https://www.mopedarmy.com/forums/read.php?2,4529156,4561553,flat=1#msg-4561553

Rear Sebring 5-Star Wheel, 30T? - $60

I'm only bringing the big stuff if I have a deposit. I also have small stock parts from the Sebring, Concord, Maxi MKII, Hobbit and maybe more. Thanks!

i'm planning on bringing a few bikes and cases and cases of stuff. What part of town is it ? I'm gonna need to get a hotel.

I pm’ed you about the si project, id like to get it if it’s still available after January.

No new bikes for me! Im trying to thin the heard, Ive been giving them away lol, that and rebuilding/refreshing old bikes!

Those Raven swing arms are dope, and totally worth fixing, someone put a v1 on a hobbit frame!