Motomarina Sebring Wire Harness Feeler

I am about to reproduce a few 85/87 (not sure it matters) wire harnesses, both the main harness and the tail light harness.

I have the materials on order to make the first couple which I’ll be needing but I planned to possibly make a few more or a lot more depending on need.

I still have to work out the pricing but I was going to offer bare harness/or tinned ends/connectors soldered etc.

I also have the 3 pin molex connectors.

I guess let me know if you seriously would buy one, I’d say a complete harness would probably end up being in the $30-$50 range

I’ll add some pictures once I get my first ones made,

All depends on the effort it takes and the price of the materials.

Re: Motomarina Sebring Wire Harness Feeler

For which engine ?

Re: Motomarina Sebring Wire Harness Feeler

Should be the same between M1 and M01 and quite possibly all the others too- just three wires coming off the motor going to a molex connector

Re: Motomarina Sebring Wire Harness Feeler

Idk why you need a whole harness just to pin one connector

Re: Motomarina Sebring Wire Harness Feeler

I’m not sure exactly what you’re getting at, but the reason I’m making new harnesses is because my harnesses that I have were trash and needed numerous splices to function. Fresh wiring on old Italian bikes tends to be nice too 🤷🏻‍♂️

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account