FS: 1980 Fantic Issimo Trike

Fantic Issimo with Pryer Industries trike conversion. The forks are from a Maliguti. Has a stock Minarelli v1 motor. Starts right up and runs great. Tops out around 25 with the gearing.

$500, located in Boothbay, Maine

IMG_7788.JPG
IMG_7789.JPG
IMG_7790.JPG

Re: FS: 1980 Fantic Issimo Trike

Malcolm B /

more pics

IMG_7794.JPG
IMG_7802.JPG
IMG_7805.JPG

Re: FS: 1980 Fantic Issimo Trike

PM sent

Re: FS: 1980 Fantic Issimo Trike

I will come buy it today. I'm about 30 minutes from you.

Re: FS: 1980 Fantic Issimo Trike

This is a steal!

Re: FS: 1980 Fantic Issimo Trike

Malcolm B /

sold

Re: FS: 1980 Fantic Issimo Trike

Thanks again and nice meeting you.

Re: FS: 1980 Fantic Issimo Trike

Letting the two stall mates get introduced.

20210411_181551.jpg

Re: FS: 1980 Fantic Issimo Trike

So cleaned the carb on this thing and man I forgot how slow stock bikes are. This has all the extra weight from the overbuilt trike rear end so it is extra slow, haha.

Re: FS: 1980 Fantic Issimo Trike

At least it runs! Nice grab!

Re: FS: 1980 Fantic Issimo Trike

Tri-ped Dave O.D.B. /

Nothing a Polini kit wont cure. I had a Moto BM Pryer with a V1. Polini, 15.15 pipe and upgear, and it will go faster than is safe. I am glad you got it because I was next in line and don't really have the room for it but couldn't see it sit for that low a price. I think Zach at Pike Powder Coating has Pryer rear fenders for it. Give him a holler and see.

Re: FS: 1980 Fantic Issimo Trike

> Tri-ped Dave O.D.B. Wrote:

> -------------------------------------------------------

> Nothing a Polini kit wont cure. I had a Moto BM Pryer with a V1.

> Polini, 15.15 pipe and upgear, and it will go faster than is safe. I am

> glad you got it because I was next in line and don't really have the

> room for it but couldn't see it sit for that low a price. I think Zach

> at Pike Powder Coating has Pryer rear fenders for it. Give him a holler

> and see.

Yeah I have another polini and pipe that will go on it. Got to finish up my other trike first. This one has the diff in the rear but it's different than my other one. This one has smaller drum and non removable sprocket. Its literally welded to the hub?

Re: FS: 1980 Fantic Issimo Trike

Tri-ped Dave O.D.B. /

I believe they are welded on. But there is always the front sprocket

Re: FS: 1980 Fantic Issimo Trike

Not sure what the welds look like, but my Microcar rear spr0cket was welded on. I carefully ground away the welds and set it up with a bolt on sprocket. I can now swap my rear sprockets to meet my needs.

Re: FS: 1980 Fantic Issimo Trike

> Tri-ped Dave O.D.B. Wrote:

> -------------------------------------------------------

> I believe they are welded on. But there is always the front sprocket

Yeah it is welded on. It has a tiny front sproket like a 9. I got a 12 when the kit goes on

Re: FS: 1980 Fantic Issimo Trike

> Declan g Wrote:

> -------------------------------------------------------

> Not sure what the welds look like, but my Microcar rear spr0cket was

> welded on. I carefully ground away the welds and set it up with a bolt

> on sprocket. I can now swap my rear sprockets to meet my needs.

Yeah I'm not to worried. This one get used much.

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account