Re: Jbot accepting porting jobs

Fake Crazy Wayne /
This single post is part of a larger thread. Start from the top or view this post in context.

Usually yes.. depends on how much meat is there around the port and how big the main port is, and whether or not the studs are sealed or open. Often aux ports pop into the stud holes so open studs sucks to do.

is the plating bond strong?

Tomos a55 I did liked to lift plating off easily.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  Jbot accepting porting jobsTopic by: Fake Crazy Wayne Fake Crazy Wayne 02/17/21 01:29PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/17/21 04:51PM
  Re: Jbot accepting porting jobsRe: Jack Rutherford Jack Rutherford 02/17/21 06:44PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/18/21 02:17AM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/18/21 01:00PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/18/21 04:13PM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/17/21 10:10PM
  Re: Jbot accepting porting jobsRe: Ľ̷̝̽͒i̶̛̼͑͠ȁ̸̧̛̽m̵̻̟̯̀̅ ̷͎̙̽̊F̶̲̺͑̓ F Ľ̷̝̽͒i̶̛̼͑͠ȁ̸̧̛̽m̵̻̟̯̀̅ ̷͎̙̽̊F̶̲̺͑̓ F 02/18/21 02:10PM
  Re: Jbot accepting porting jobsRe: Probably Fred Probably Fred 02/18/21 05:12PM
  Re: Jbot accepting porting jobsRe: Siezed Again Siezed Again 02/18/21 05:22PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/18/21 07:38PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/19/21 10:40AM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/19/21 01:41PM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/19/21 01:52PM
  Re: Jbot accepting porting jobsRe: Marc Friedman Marc Friedman 02/18/21 09:08PM
  Re: Jbot accepting porting jobsRe: EH FCC of the QCB EH FCC of the QCB 02/18/21 10:27PM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/19/21 02:29PM
  Re: Jbot accepting porting jobsRe: Gerry F Gerry F 02/18/21 10:46PM
  Re: Jbot accepting porting jobsRe: roots to wings roots to wings 02/18/21 10:51PM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/19/21 02:46PM
  Re: Jbot accepting porting jobsRe: Terbo Speghetti Terbo Speghetti 02/19/21 05:51AM
  Re: Jbot accepting porting jobsRe: Tri-ped Dave O.D.B. Tri-ped Dave O.D.B. 02/19/21 07:41AM
  Re: Jbot accepting porting jobsRe: Steven Whitright Steven Whitright 02/19/21 11:11AM
  Re: Jbot accepting porting jobsRe: Marc Friedman Marc Friedman 02/19/21 11:26AM
  Re: Jbot accepting porting jobsRe: Terbo Speghetti Terbo Speghetti 02/19/21 09:35AM
  Re: Jbot accepting porting jobsRe: Buttcheeks BUZZARD Buttcheeks BUZZARD 02/19/21 11:45AM
  Re: Jbot accepting porting jobsRe: EH FCC of the QCB EH FCC of the QCB 02/19/21 01:12PM
  Re: Jbot accepting porting jobsRe: Toledo Riot Toledo Riot 02/19/21 03:05PM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/19/21 03:26PM
  Re: Jbot accepting porting jobsRe: Marc Friedman Marc Friedman 02/19/21 05:11PM
  Re: Jbot accepting porting jobsRe: Stephen Keller Stephen Keller 02/19/21 11:28PM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/23/21 11:49AM
  Re: Jbot accepting porting jobsRe: Tweaker trash Tweaker trash 02/23/21 05:35PM
  Re: Jbot accepting porting jobsRe: LSLB RXb LSLB RXb 02/23/21 12:27PM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/23/21 12:35PM
  Re: Jbot accepting porting jobsRe: LSLB RXb LSLB RXb 02/23/21 01:09PM
  Re: Jbot accepting porting jobsRe: Mitch Mills Mitch Mills 02/23/21 01:52PM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/23/21 10:53PM
  Re: Jbot accepting porting jobsRe: Ken Thomas Ken Thomas 02/23/21 07:07PM
  Re: Jbot accepting porting jobsRe: Jack Rutherford Jack Rutherford 02/23/21 08:08PM
  Re: Jbot accepting porting jobsRe: Fake Crazy Wayne Fake Crazy Wayne 02/23/21 08:26PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account