Re: Jbot accepting porting jobs

roots to wings /
This single post is part of a larger thread. Start from the top or view this post in context.

hey ken, are you saying one should not port a stock cylinder at all? I'm just looking to take a hi torque maxi to 40 with good takeoff, have it run reliably, and have it run like it's does now at 30mph. No interest in pushing the speed envelope like all these 50 mph insaniacs. Too old! There's got to be a way cheaper and more reliable way to do it than buying an $85 kit, $100 crank, and $100 pipe.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  Jbot accepting porting jobsTopic by: JBOT Admin JBOT Admin 02/17/21 01:29PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/17/21 04:51PM
  Re: Jbot accepting porting jobsRe: Jack Rutherford Jack Rutherford 02/17/21 06:44PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/18/21 02:17AM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/18/21 01:00PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/18/21 04:13PM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/17/21 10:10PM
  Re: Jbot accepting porting jobsRe: Ľ̷̝̽͒i̶̛̼͑͠ȁ̸̧̛̽m̵̻̟̯̀̅ ̷͎̙̽̊F̶̲̺͑̓ F Ľ̷̝̽͒i̶̛̼͑͠ȁ̸̧̛̽m̵̻̟̯̀̅ ̷͎̙̽̊F̶̲̺͑̓ F 02/18/21 02:10PM
  Re: Jbot accepting porting jobsRe: Probably Fred Probably Fred 02/18/21 05:12PM
  Re: Jbot accepting porting jobsRe: Siezed Again Siezed Again 02/18/21 05:22PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/18/21 07:38PM
  Re: Jbot accepting porting jobsRe: Jay Rivett Jay Rivett 02/19/21 10:40AM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/19/21 01:41PM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/19/21 01:52PM
  Re: Jbot accepting porting jobsRe: Marc Friedman Marc Friedman 02/18/21 09:08PM
  Re: Jbot accepting porting jobsRe: EH FCC of the QCB EH FCC of the QCB 02/18/21 10:27PM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/19/21 02:29PM
  Re: Jbot accepting porting jobsRe: Gerry F Gerry F 02/18/21 10:46PM
  Re: Jbot accepting porting jobsRe: roots to wings roots to wings 02/18/21 10:51PM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/19/21 02:46PM
  Re: Jbot accepting porting jobsRe: Terbo Speghetti Terbo Speghetti 02/19/21 05:51AM
  Re: Jbot accepting porting jobsRe: Tri-ped Dave O.D.B. Tri-ped Dave O.D.B. 02/19/21 07:41AM
  Re: Jbot accepting porting jobsRe: Steven Whitright Steven Whitright 02/19/21 11:11AM
  Re: Jbot accepting porting jobsRe: Marc Friedman Marc Friedman 02/19/21 11:26AM
  Re: Jbot accepting porting jobsRe: Terbo Speghetti Terbo Speghetti 02/19/21 09:35AM
  Re: Jbot accepting porting jobsRe: Buttcheeks BUZZARD Buttcheeks BUZZARD 02/19/21 11:45AM
  Re: Jbot accepting porting jobsRe: EH FCC of the QCB EH FCC of the QCB 02/19/21 01:12PM
  Re: Jbot accepting porting jobsRe: Toledo Riot Toledo Riot 02/19/21 03:05PM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/19/21 03:26PM
  Re: Jbot accepting porting jobsRe: Marc Friedman Marc Friedman 02/19/21 05:11PM
  Re: Jbot accepting porting jobsRe: Stephen Keller Stephen Keller 02/19/21 11:28PM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/23/21 11:49AM
  Re: Jbot accepting porting jobsRe: Tweaker trash Tweaker trash 02/23/21 05:35PM
  Re: Jbot accepting porting jobsRe: LSLB RXb LSLB RXb 02/23/21 12:27PM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/23/21 12:35PM
  Re: Jbot accepting porting jobsRe: LSLB RXb LSLB RXb 02/23/21 01:09PM
  Re: Jbot accepting porting jobsRe: Mitch Mills Mitch Mills 02/23/21 01:52PM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/23/21 10:53PM
  Re: Jbot accepting porting jobsRe: Ken Thomas Ken Thomas 02/23/21 07:07PM
  Re: Jbot accepting porting jobsRe: Jack Rutherford Jack Rutherford 02/23/21 08:08PM
  Re: Jbot accepting porting jobsRe: JBOT Admin JBOT Admin 02/23/21 08:26PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account