copy paste from my cl ad:
Up for grabs is my puch (sears) free spirit moped. This bike has a TON of new parts and is a ground up build that is 90% done. The seat has been modified and adapted from a tomos and makes a huge difference in riding comfort. It also features a storage tray underneath that fits small oil bottles, essential tools, beer, etc. Very handy!
The engine has been upgraded from a single speed e50, to a two speed za50 that has been completely disassembled and inspected. The transmission is in amazing shape, but the crankshaft bearings had excessive wear. New NSK e20 and L17 bearings were installed along with new viton oil seals. New atomic shift pucks were installed (essential for these motors) as well.
All parts have less than 5 miles on them.
new parts:
- ESO 43.5mm 70cc big bore jug
-45mm high compression head
-new gaskets
-15mm MLM intake
-15mm genuine bing carburetor
-atomic shift pucks
-chrome tecno boss exhaust system
-new style points stator plate
-neon shocks
-ebr front forks
-sava mediterra 17 x 2.75in tires
-new inner tubes
-grimeca 5 star rims
-front and rear hubs
-new 23t freewheel
-KMC gold pedal chain
-new pedal chain tensioner
-YBN 415hd drive chain
-magic eagle 80x18mm brake pads
-new teflon coated front and rear brake cables
-new throttle and clutch cables
-tomos front headlight
-NGK b8hs spark plug
-olympia spark plug boot
-new fuel petcock
-new motion pro tygon fuel line
-motion pro 90deg fuel filter
Unfortunately I need to focus on some other projects and this has been put on the back burner. It needs the lights wired up (tail light wiring is already ran to the engine), and some jetting/tuning. It does run as is. Once buttoned up, this bike should do a solid 45mph with awesome take-off due to the 2 speed za50 motor. $800 firm for now. if it doesn't sell, I will set aside time to finish it up and the price will go up accordingly.
