WTB Puch 2hp Top End

john cervini /
20200310_120834.jpg

I picked up this jewel because it was in really nice original condition. Unfortunately it's the 1hp and it's soooooo slow. It runs perfect but I would like to put a 2hp top end on it. Looking for a cylinder, head and piston in good shape. Let me know what you have shipped to 13365 NY. Thanks!

Re: WTB Puch 2hp Top End

I've got a 2HP magnum head and cylinder that I wouldn't mind getting rid of. Also have a MLM bing 15mm intake to go along with it. I'm located in NYC and can get pics tomorrow if you're interested.(edited)

Re: WTB Puch 2hp Top End

Overpriced Parts /

Magnum cylinder is angle port

I got a nice high torque 2hp top end but you also need a different exhaust pipe and you don’t take PayPal so oh well sorry

Re: WTB Puch 2hp Top End

john cervini /

Andrew B. Thanks for the offer but as ken said, magnum cylinders are angle port exhaust and I'll need flat port.

Ken, not sure what I did to piss you off? I thought sending you free parts was kinda generous. There's lots of ways to pay but no worries.

Re: WTB Puch 2hp Top End

No problem. good luck with the search!

Re: WTB Puch 2hp Top End

Overpriced Parts /

> john cervini Wrote:

> -------------------------------------------------------

> Andrew B. Thanks for the offer but as ken said, magnum cylinders are

> angle port exhaust and I'll need flat port.

>

> Ken, not sure what I did to piss you off? I thought sending you free

> parts was kinda generous. There's lots of ways to pay but no worries.

Not trying to piss you off but you said you don’t take PayPal that is the only way I can go cause I don’t have any other account

I don’t like PayPal co at all but that’s what they gave me

Re: WTB Puch 2hp Top End

I have a cast iron #11 cylinder with low miles off a running Maxi MKII I'd let go for $45 shipped. I can make a PayPal invoice which doesnt require a paypal account. Only issue is I'm out of town until monday morning.

20200310_221956.jpg
20200310_222009.jpg

Re: WTB Puch 2hp Top End

> Overpriced Parts Wrote:

> -------------------------------------------------------

> > john cervini Wrote:

>

> > -------------------------------------------------------

>

> > Andrew B. Thanks for the offer but as ken said, magnum cylinders are

>

> > angle port exhaust and I'll need flat port.

>

> >

>

> > Ken, not sure what I did to piss you off? I thought sending you free

>

> > parts was kinda generous. There's lots of ways to pay but no worries.

>

> Not trying to piss you off but you said you don’t take PayPal that is

> the only way I can go cause I don’t have any other account

>

> I don’t like PayPal co at all but that’s what they gave me

Get a Postal money order, or a prepaid mc or visa?

Re: WTB Puch 2hp Top End

Michael Domanski /
D1C79A24-A1BB-4EF6-9E26-2974F47AC940.jpeg

John I have this it’s a #2 no piston nice shape studs good, you can have it just pay shipping , no PayPal postal MO only

Re: WTB Puch 2hp Top End

john cervini /
20200311_095553.jpg

Michael, I will keep that in mind. I have a nos #22 piston if anyone has the matching cylinder and head let me know. Thanks!

Re: WTB Puch 2hp Top End

Michael Domanski /
7F7A7F8F-E964-4378-AEFF-E1B96126C768.jpeg

Found the piston let me know

Re: WTB Puch 2hp Top End

Got a high torg cylinder and head. $40 shipped.

Re: WTB Puch 2hp Top End

I have a 2hp top end off a Swinger E50, its stamped 3 on the piston. Just swapped it out to put a larger kit on 65.00 shipped

Re: WTB Puch 2hp Top End

john cervini /

Will, I emailed you.

I'm trying to find everything I need in one place. I need a 1.5 or 2hp top end, 14mm short intake, #24 slide and a 56 jet. I have the carb and 2.22 atomizer. I have a magnum seat, some random magnum parts and a ton of NOS parts for trade or can just buy outright. Thanks!

Re: WTB Puch 2hp Top End

Hey John!!

Sorry my spam folder eats emails sometimes..lol

Let me get to the house and ill check everything out, just been busy with my kiddo :)

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account