I have 3 1/2 of these Morini/Malaguti Case splitting tools. 50$ Each plus flat rate box shipping for these Old dealers tools.
Not sure how they work but you are pretty smart and can figure it out!
I’ll sell the 1/2 set for 15$+ shipping DM me and I’ll let ya know what’s missing
Bump
This makes way more sense looking at the Picture. Thanks for posting @live evil
First one sold. 2 available!
What is missing on the incomplete one?
> ugp * Wrote:
> -------------------------------------------------------
> First one sold. 2 available!
Still waiting on total price with shipping.
1 sold, 1 ready to go for live evil, and 1 still up for grabs!
@Michael it’s missing all of the post and loose hardware. Currently trying to get the pieces to finish the tool set.
If you love morini you should definitely think about getting one of these.
Got the tracking number. Thank you. Fyi for others.... The pic I posted above is from the Morini M1 service manual. Id bet money the case splitter will work on any Morini ped motor. The long spacers are used on one speeds. The shorter spacers will be needed on multi gear motors that have longer shafts to accommodate more gears.(edited)
Thanks @live evil. 1 still up for grabs!!!
@Michael basically all the really important stuff that is used to space out the tool correctly.
> ugp * Wrote:
> -------------------------------------------------------
> Thanks @live evil. 1 still up for grabs!!!
No problem man. This site is all about helping each other when we can.
> ugp * Wrote:
> -------------------------------------------------------
> @Michael basically all the really important stuff that is used to space
> out the tool correctly.
Take detailed photos and measurements of those spacers. They can be replicated. If nothing else, one could use bolts with a nut on top and on bottom of the bridge. Thread up and down for any length in between.
Yeah I mean I'll buy that one with the missing pieces if you can give me some quick measurements on the spacers so I could 3D print some new ones
> Nick Haber Wrote:
> -------------------------------------------------------
> Yeah I mean I'll buy that one with the missing pieces if you can give me
> some quick measurements on the spacers so I could 3D print some new ones
I got my set... Big thank you to UGP!!
I even got a part I dont recognize as part of the set. More research needed...
Anyway, Nick I can send you measurements and pics.
@live evil
I think you are talking about the stock Exhaust baffle tip that I sent ya!
> ugp * Wrote:
> -------------------------------------------------------
> @live evil
>
> I think you are talking about the stock Exhaust baffle tip that I sent
> ya!
Lolz...i kept thinking it looked familiar. Yet it's build wasn't heavy enough to use as a tool. Thanks man, I will find a use on one of the Italians.
Bump
I have one compete case splitting tool still available. 50$ plus shipping.
still Available
Hey this tool kit should have only 6 spacers NOT 7. You have one too many in this last kit. Look at the pic I posted above.(edited)
Here is a pic of mine .... Note numbers 1 thru 5. The 6th one (on the left) will have no markings and the groove at the top is noticeably thinner.
(edited)
Yes @live evil I think there is a double number 2 in that picture.
> live ɘvil Wrote:
> -------------------------------------------------------
> Here is a pic of mine .... Note numbers 1 thru 5. The 6th one (on the
> left) will have no markings and the groove at the top is noticeably
> thinner.
> >
> ugp * Wrote:
> -------------------------------------------------------
> Yes @live evil I think there is a double number 2 in that picture.
>
> > live ɘvil Wrote:
>
> > -------------------------------------------------------
>
> > Here is a pic of mine .... Note numbers 1 thru 5. The 6th one (on the
>
> > left) will have no markings and the groove at the top is noticeably
>
> > thinner.
>
> > >
Remove it form the complete kit and add it to the incomplete kit. The person that buys the incomplete kit will at least have one of six and be able to see how to make the other five.
Want to post in this forum? We'd love to have you join the discussion, but first: