Re: WTB Motion Pro m6 Stud Installer

* * /
This single post is part of a larger thread. Start from the top or view this post in context.

> Dirty30 Dillon Wrote:

> -------------------------------------------------------

> > Rocco Taco Wrote:

>

> > -------------------------------------------------------

>

> > What makes you think I retracted that statement? We just see it two

>

> > different ways. The lock tie is cool ( i like to let it dry on the

> stud

>

> > first)

>

> I don't think you retracted something, but you put quotes around that

> entire response. You originally said "I think people snap studs because

> they don't leave room for the studd to thread in when tightening the

> head nuts."

>

> Also, Loctite is an anaerobic sealant, so letting it dry before hand

> completely defeats the purpose of using it in the first place.

>

> > Well fuck I don’t think it matters that much if you prefer to

> pre-torque

>

> > the studs ether way they are going to get torqued down to the same

> depth

>

> If you don't bottom/shoulder your studs and you are allowing them to

> spin while tightening the head nuts, you are causing unneeded wear and

> force on the weak aluminum case

I doubt the spin much, but yea I could see at 6-7lb the threads getting yaked. I dkn , iv done both ways & the hand tighting seems to work fine. torque those fuckers till there is no threads left on top to grab. It’s just over kill I think

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  WTB Motion Pro m6 Stud InstallerTopic by: Sean Daugherty Sean Daugherty 01/16/20 04:33PM
  Re: WTB Motion Pro m6 Stud InstallerRe: MPB Andyrew MPB Andyrew 01/16/20 04:36PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Mike Boyd Mike Boyd 01/16/20 05:48PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/16/20 08:28PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dave Steele Dave Steele 01/16/20 05:10PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/16/20 05:37PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/16/20 08:33PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/16/20 09:03PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/17/20 09:12AM
  Re: WTB Motion Pro m6 Stud InstallerRe: ♣Slew Foot♣ ♣Slew Foot♣ 01/18/20 08:47AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Richard Eberline Richard Eberline 01/16/20 07:01PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Terbo Speghetti Terbo Speghetti 01/16/20 07:23PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Richard Eberline Richard Eberline 01/16/20 07:40PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/17/20 09:59AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/17/20 11:40AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/17/20 11:44AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/17/20 11:46AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Angry Hipster Angry Hipster 01/17/20 02:29PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/17/20 02:47PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/17/20 02:25PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/17/20 02:54PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/17/20 03:17PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/17/20 03:57PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/17/20 04:49PM
  Re: WTB Motion Pro m6 Stud InstallerRe: ***Kim Jong illest*** ***Kim Jong illest*** 01/17/20 05:34PM
  Re: WTB Motion Pro m6 Stud InstallerRe: josh n josh n 01/18/20 12:26AM
  Re: WTB Motion Pro m6 Stud InstallerRe: river 2strokes river 2strokes 01/19/20 05:22AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/19/20 12:14PM
  Re: WTB Motion Pro m6 Stud InstallerRe: ♣Slew Foot♣ ♣Slew Foot♣ 01/19/20 07:29PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Overpriced Parts Overpriced Parts 01/19/20 02:37PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/19/20 02:41PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 02/02/20 10:58PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account