Re: WTB Motion Pro m6 Stud Installer

Dirty30 Dillon /
This single post is part of a larger thread. Start from the top or view this post in context.

> Rocco Taco Wrote:

> -------------------------------------------------------

> What makes you think I retracted that statement? We just see it two

> different ways. The lock tie is cool ( i like to let it dry on the stud

> first)

I don't think you retracted something, but you put quotes around that entire response. You originally said "I think people snap studs because they don't leave room for the studd to thread in when tightening the head nuts."

Also, Loctite is an anaerobic sealant, so letting it dry before hand completely defeats the purpose of using it in the first place.

> Well fuck I don’t think it matters that much if you prefer to pre-torque

> the studs ether way they are going to get torqued down to the same depth

If you don't bottom/shoulder your studs and you are allowing them to spin while tightening the head nuts, you are causing unneeded wear and force on the weak aluminum case threads.

This single post is part of a larger thread. Start from the top or view this post in context.
Subject Written By Posted
  WTB Motion Pro m6 Stud InstallerTopic by: Sean Daugherty Sean Daugherty 01/16/20 04:33PM
  Re: WTB Motion Pro m6 Stud InstallerRe: MPB Andyrew MPB Andyrew 01/16/20 04:36PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Mike Boyd Mike Boyd 01/16/20 05:48PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/16/20 08:28PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dave Steele Dave Steele 01/16/20 05:10PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/16/20 05:37PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/16/20 08:33PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/16/20 09:03PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/17/20 09:12AM
  Re: WTB Motion Pro m6 Stud InstallerRe: ♣Slew Foot♣ ♣Slew Foot♣ 01/18/20 08:47AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Richard Eberline Richard Eberline 01/16/20 07:01PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Terbo Speghetti Terbo Speghetti 01/16/20 07:23PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Richard Eberline Richard Eberline 01/16/20 07:40PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/17/20 09:59AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/17/20 11:40AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/17/20 11:44AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/17/20 11:46AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Angry Hipster Angry Hipster 01/17/20 02:29PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/17/20 02:47PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/17/20 02:25PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/17/20 02:54PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/17/20 03:17PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/17/20 03:57PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 01/17/20 04:49PM
  Re: WTB Motion Pro m6 Stud InstallerRe: ***Kim Jong illest*** ***Kim Jong illest*** 01/17/20 05:34PM
  Re: WTB Motion Pro m6 Stud InstallerRe: josh n josh n 01/18/20 12:26AM
  Re: WTB Motion Pro m6 Stud InstallerRe: river 2strokes river 2strokes 01/19/20 05:22AM
  Re: WTB Motion Pro m6 Stud InstallerRe: Sean Daugherty Sean Daugherty 01/19/20 12:14PM
  Re: WTB Motion Pro m6 Stud InstallerRe: ♣Slew Foot♣ ♣Slew Foot♣ 01/19/20 07:29PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Overpriced Parts Overpriced Parts 01/19/20 02:37PM
  Re: WTB Motion Pro m6 Stud InstallerRe: Dirty30 Dillon Dirty30 Dillon 01/19/20 02:41PM
  Re: WTB Motion Pro m6 Stud InstallerRe: * * * * 02/02/20 10:58PM

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account