Sell a bike, buy a bike, let’s get it.
selling a Gadabout moped, V1 engine. no spark
engine turns over fine. maybe bad condensor or stator coils? idk
Chasing $150
i'll get a pic posted....
have a complete solex but missing the handlebars.... complete engine, frame, everything! except the handlebars. would need $100 for everything or can part out. drop me a message for my number and i can send pics
I have a 100% there ciao in a box I could bring for sale. SC springer Deluxe w all plastics and both sideboxes and all box and side covers. All levers and switches and wiring complete. Nice chrome fenders good paint. Tank is not bad but needs a soak like they all do. Whole spinning wired-in motor and .10 carb and fastest 6.5:1 gearbox and ss clutch stuffs. Engine cover. Key. Stock pipe. All lights and lenses. 17" fair chrome spokes w brand new pair of cheng shins but no tubes. Needs petcock. Needs better centerstand (edited)
I've still got this for sale: https://www.mopedarmy.com/forums/read.php?2,4280683
$175 at the rally
other stuff i need if you wanna sell it to me at the rally:
i need a ciao centerstand (unless someone buys that ciao from me and in that case, they will probably need one ha)
i need a 17*2.00 hutchinson vrroom tire
I need a 16*2.50 hutchinson vrroom tire
i need a shiny/pretty chrome vespa 16" spokes rear rim
i need a fugly ciao springer seatpost and pan
im selling this mamma jamma vespa euro variaotor
Alright so I’ll take NU50 transmissions, KS assemblies, projects, let me know what you have and ill most likely be in for it in the means of Urbans.
Also M1 bits or a complete motor, open to everything but a set of post ‘85 cases would be cool.
Otherwise a Thomas roller would be primo if you wanna part ways with one. Lemme know what’s good bubbies
I have a targa lx 2spd with a shared flywheel keyway
> Chris Szuba Wrote:
> -------------------------------------------------------
> selling a Gadabout moped, V1 engine. no spark
>
> engine turns over fine. maybe bad condensor or stator coils? idk
>
> Chasing $150
>
> i'll get a pic posted....
>
> have a complete solex but missing the handlebars.... complete engine,
> frame, everything! except the handlebars. would need $100 for everything
> or can part out. drop me a message for my number and i can send pics
Pics...
Gadabout
Solex
Yes that's an engine in shrink wrap... that's how anal the dude was about keeping it together and clean lol
I have a project Cosmo colt with a M101 that needs a correct direction flywheel to ride, but is running (albeit backwards). Has a set of EBRs with preload and brace, fresh cables and controls, 65cc gila and peoples pipe. Good bike and a unicorn powerplant. Id like to see 1k for it, but talk at me.
Also have a MT400 safari, running and riding, that i could bring. id like to see 500 for. Again, talk at me.
$600. 1978 Intramotor Gloria Scout
stock, modded. New engine seals, chain, tires, tubes, grips, MLM edm circuit pipe. custom rear bracket, removed some filter screens + airbox tubes, and rejetted.
also includes title, parts engine, user manual, vintage NGK spark plugs.
starts easy, idles great, runs, rides, everything functions like it should.
it'll get up to 30mph with my 200lb ass on it. i know exactly what it needs; found a website to buy the 60cc airsal kit from EU for ~$90.
if someone sends me a down payment, i'll bring it. Otherwise, i'll keep it. it sure is purdy.
Doppler ER3 variator maybe 10 miles on it 140$
https://www.treatland.tv/motobecane-doppler-variator-ER3-p/mbk-er3-variator-292547.htm
Av10 cases still in the box 40$
https://www.treatland.tv/motobecane-AV10-engine-case-p/mbk-av10-case-nude.htm
NOS Polini 50cc W port, previous owner drill stud holes in correct spot. Piston I have with it dude said it was the right one I think the ring gap need to be fixed to properly fit 120$
https://www.treatland.tv/motobecane-MBK-polini-50cc-cylinder-kit-p/mbk-polini-kit-134.0302.htm
Solo 2 speed pulley I was gunna put on a motobecane 80$
Iso a clockwise flywheel for Moroni m101 if anyone's holding
I forgot, I have a brand new Giannelli Vespa oversize stock style perf pipe for everything Vespa other than ciao. Giant header and chamber for 35-40 all day. W heat shield. $40 or trade me a ciao version city or sito or Giannelli?
WTB: Peugeot 103 circuit pipe with threaded flange that hasn't been run over
FS: Sachs 505D/2 2 speed manual. Athena 80cc with intakes, TOP Crank, Modified clutch, Treats CDI
Interested in a backwards running Cosmo colt 3 with M101 as a trade on that sachs? never had a chance to see a good built sachs before, much less a manual
> Travis Noll Wrote:
> -------------------------------------------------------
> Interested in a backwards running Cosmo colt 3 with M101 as a trade on
> that sachs? never had a chance to see a good built sachs before, much
> less a manual
It's just a motor tho
Oh, misunderstanding on my part.
Short on cash, but is there anything you're looking for trade-wise?
> DrGeorgeTompson (Alan) Wrote:
> -------------------------------------------------------
> > Travis Noll Wrote:
>
> > -------------------------------------------------------
>
> > Interested in a backwards running Cosmo colt 3 with M101 as a trade on
>
> > that sachs? never had a chance to see a good built sachs before, much
>
> > less a manual
>
> It's just a motor tho
I do have a safari then let go for the motor plus cash
Lookin for a good puch 5-star rear hub if anyone has one.
Thanks
Still available
> Travis Noll Wrote:
> -------------------------------------------------------
> I have a project Cosmo colt with a M101 that needs a correct direction
> flywheel to ride, but is running (albeit backwards). Has a set of EBRs
> with preload and brace, fresh cables and controls, 65cc gila and peoples
> pipe. Good bike and a unicorn powerplant. Id like to see 1k for it, but
> talk at me.
>
> Also have a MT400 safari, running and riding, that i could bring. id
> like to see 500 for. Again, talk at me.
Will you sell the Caprice hearse?!? OMG in love!
Want to post in this forum? We'd love to have you join the discussion, but first: