WTB: round TALL 14bing intake w/ earl hole

since Treats is gonna end up having it's own sub-section this year in my tax returns, i figured i should at least give the impression of being responsible and ask for a part here first;

Anyone got a tall round 14 intake with the oil hole kicking around?

20190828_080212.jpg

Re: WTB: round TALL 14bing intake w/ earl hole

Ive drilled these out before using a 9/16" bit which =14.2875mm.

Re: WTB: round TALL 14bing intake w/ earl hole

yeah but those are $38 from treats

figured id check here first

Re: WTB: round TALL 14bing intake w/ earl hole

> ..... poop Wrote:

> -------------------------------------------------------

> yeah but those are $38 from treats

>

> figured id check here first

I was talking about the one on your bike.

Re: WTB: round TALL 14bing intake w/ earl hole

Overpriced Parts /

They don't make stock 14mm tall intakes with oil nipple and If you drill out the stock 12mm one with one pass with big bit the nipple may come off or intake can snap there,

I like to take my time and open up with dremel bits and sandpaper rolls,

I may be able to make one for ya cheep If I can find the stock intake from a silver MKII I kitted a while back .

I'll look tonight when I get home

Re: WTB: round TALL 14bing intake w/ earl hole

mine done snappeth

> live ɘvil Wrote:

> -------------------------------------------------------

> > ..... poop Wrote:

>

> > -------------------------------------------------------

>

> > yeah but those are $38 from treats

>

> >

>

> > figured id check here first

>

> I was talking about the one on your bike.

Re: WTB: round TALL 14bing intake w/ earl hole

you dont have to go and make one

im just throwing around ideas and wasting money on shit i dont need

Re: WTB: round TALL 14bing intake w/ earl hole

> ..... poop Wrote:

> -------------------------------------------------------

> mine done snappeth

>

> > live ɘvil Wrote:

>

> > -------------------------------------------------------

>

> > > ..... poop Wrote:

>

> >

>

> > > -------------------------------------------------------

>

> >

>

> > > yeah but those are $38 from treats

>

> >

>

> > >

>

> >

>

> > > figured id check here first

>

> >

>

> > I was talking about the one on your bike.

I always clamped the side I was drilling on into an aluminum jawed vice. Luck I guess. (edited)

Re: WTB: round TALL 14bing intake w/ earl hole

Drill hole in this intake and insert your old injection nipple.

carb intake & v stack

Re: WTB: round TALL 14bing intake w/ earl hole

Overpriced Parts /

My tall stock MKII intake with nipple is on a magnum cylinder in a box I gave to two stroke Tuesdays/black pipe people in Cleveland, ask WillD, Deric or one of the Chrises, if you want it,

Re: WTB: round TALL 14bing intake w/ earl hole

thanks guys

i woke up earlier, stood in the garage with my coffee and had what i think alcoholics call a "moment of clarity"

im hemorrhaging moped money and need to pull back and take stock of all the junk i have and clean out before i stock up

what i need is a Boston swap meet

Re: WTB: round TALL 14bing intake w/ earl hole

Overpriced Parts /

“Mopeds will see you through times of no money more then money will see you through times of no Mopeds”

Remember this old saying ^ though it had a different word then Mopeds haha,

I got no money coming in for at least a couple more weeks but got 3 Mopeds with gas in them so it’s been mopeds to the dollar store and to the mexi restaurant on taco twe for 1$ tacos

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account