I'm looking for this part for the clutch of a Sachs 504/5 engine. I f*cked this one up bad!
Junkyard has one but the photo is sketchy and it looks like it's been through a lot.
Part number 18 on this diagram.
Might consider buying entire clutch assembly if you would rather sell whole.
Shipping to 37216.
Thank you!
Pretty sure i've got one. PM me so I don't forget and i'll look tonight.
Andrew,
Stephen Simmons hooked me up! Thank you though!
I rebuilt a 504a clutch several hundred times.
that piece was the culprit of my shitty clutch to begin with. totally chipped and worn.
have fun!
k cool, glad ya found one.
If you take the old one and soaking in vinegar for a few days then you take out the super fine sandpaper and a toothpick and get all the grooves and pitting out and it will work even better because it will have better play because the clearance Gap will be larger so the plates will slide back and forth easier
> ♣Slew Foot♣ Wrote:
> -------------------------------------------------------
> If you take the old one and soaking in vinegar for a few days then you
> take out the super fine sandpaper and a toothpick and get all the
> grooves and pitting out and it will work even better because it will
> have better play because the clearance Gap will be larger so the plates
> will slide back and forth easier
kinda, when you get a lil too much play it can get sideways e and catch. I've had this problem on worn ones where it revs and then drops all at once and playing with it in hand it definitely seems like it gets a little uneven and catches
Want to post in this forum? We'd love to have you join the discussion, but first: