Re: wtb stock Tomos carburetor and intake

Ben Burnham /
This single post is part of a larger thread. Start from the top or view this post in context.

Just converted my A3MS from old Encarwi to a Dellorto 15:15. Treatland supply a rather expensive manifold, which requires the side cover to be cut to fit the new setup. I decided to make my own manifold(see photo) and fit a Dellorto without messing around with the side cover too much. It's currently running a 54 jet and the results are impressive! Next is to port the cylinder and see what I can do going down that road. My new manifold was made from an old ladder hook, 14mm ID and 15.8mmOD. I bought the carb shims from Dellorto's own website(pennies) to fit the new carb. The new carb is actually a Dellorto copy...a "Rungtong", but is more than adequate.

DSC_1043.JPG
DSC_1047.JPG
DSC_1049.JPG
This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account