2 bikes, lot of parts

Robby Gagnon /

2 close to running bikes.

1 magnum frame motorcycle tank, knobbies, cr80r forks, clip ons, e50 bottom end. I can sell with parts to make whole

1 maxi chopper cr80r forks, rear hand brake with gold knuckles, e50, metra 65 (the real cast iron one) mikuni vm20 and mlm intake. Boss pipe. No spark? Prolly just points.

Lots of puch, tomos parts, v1ks 90 brn frames, za50, e50, wheels

Pm me offers. In louisville. Can ship.

Re: 2 bikes, lot of parts

Robby Gagnon /

Also pm for some pics. Much easier to just send you pics of what you're interested in.

20190120_192930.jpg

Re: 2 bikes, lot of parts

Got any tomos tt frame+tank type stuff?

Re: 2 bikes, lot of parts

Kinda want that ridiculous rear brake setup lol. Would you part that monstrosity out?

Re: 2 bikes, lot of parts

Robby Gagnon /

Have a silver 90s ttxl top tank fram and swingarm

Also have another tomos roller

Re: 2 bikes, lot of parts

Robby Gagnon /

I dont know that i could part it out. Honestly, its just a rear brake lever off a little dirtbike. I cut the mount off the dirtbike frame and welded it to the side of the maxi. With a bit of machine work to get the handle right and some threaded rod goodness cobbled to the brake plate..

Re: 2 bikes, lot of parts

Kevin Edwards /

ISO: rear spoked rim and brake plate doesn’t have to be pretty just all there off a 70’s /80’s bullet

Shipped to 68105zip

Re: 2 bikes, lot of parts

Robby Gagnon /

I will check on the rim. Probably have it

Re: 2 bikes, lot of parts

Robby Gagnon /

Magnum frame and swing arm sold

Re: 2 bikes, lot of parts

I couldn't tell what that brass knuckle thing was for

Re: 2 bikes, lot of parts

Robby Gagnon /

Rear brake

Re: 2 bikes, lot of parts

Robby Gagnon /

Bump! Plenty of stuff left!

Re: 2 bikes, lot of parts

Robby Gagnon /

Heres a v1ks with 90 brn.

20190317_214741.jpg

Re: 2 bikes, lot of parts

Kevin Bishop /

Interested

Re: 2 bikes, lot of parts

> Robby Gagnon Wrote:

> -------------------------------------------------------

> Heres a v1ks with 90 brn.

Sent you a DM

Re: 2 bikes, lot of parts

Alexandro Ramirez-Nagy /

could I snag that headlight bucket key? shipped to 45719, I'll PM you.

Re: 2 bikes, lot of parts

what za50 stuff ya got?

Re: 2 bikes, lot of parts

Looking for a tomos a55 clutch cover if you have one.

Re: 2 bikes, lot of parts

Robby Gagnon /

Have 2 za50 engines, one in a box ready for rebuild, one complete.

Same goes for the 2 e50 engines back there

Re: 2 bikes, lot of parts

Robby Gagnon /

The black thing is just a switch, and doesnt come out like a key. But i pmd u back

Re: 2 bikes, lot of parts

Robby Gagnon /

U looking for kick or pedal start?

Re: 2 bikes, lot of parts

Robby Gagnon /

Heres all the tomos stuff ive got

20190331_114236.jpg

Re: 2 bikes, lot of parts

Robby Gagnon /

Id like to sell everything in this container except for a few of our personal bikes. If someone showed up with $2k, a pick up and a trailer, id let it all go in one big lot.

Industrial shelf full of parts, 10+frames, bottom ends, everything. Really just need it gone for the space.

15540474245535185657505275732502.jpg

Re: 2 bikes, lot of parts

Marc Andre de Seve /

Any thing for a motobecane... Or old Honda cb... What's in the corner.... Far corner

Re: 2 bikes, lot of parts

Alexandro Ramirez-Nagy /

got anythang for a batavus or anything vespa?

Re: 2 bikes, lot of parts

PM'd re: ZAs!

Re: 2 bikes, lot of parts

I’m interested in getting a solid motor or bottom end for a puch

either za50 or e50 is ok

I’m ok with a bare bottom end as long as it’s usable

I’d like a cylinder kit too, if you have anything

Eventually, I’d like to rebuild my za50 maxi and get it running reliably with all new bearings/seals, a new crank, a kit, a big pipe, etc. also, I want to see if I can manage to run a vm26 or vm28 on it (they’re the smallest carbs in my parts bin).

The problem is that my za50 is utterly and completely toasted and I can’t afford to give it the rebuild it needs. For now, I’m hoping to just throw an entirely different motor on and ride. Let me know what you have and how much you want for it shipped to San Francisco, ca

Re: 2 bikes, lot of parts

Wesley Ambrosini /

pmd

Re: 2 bikes, lot of parts

PMing you re: forks & Mikuni!

Re: 2 bikes, lot of parts

Jaxon Andrews /

Got any tomos bullet step through games with the vin?

Want to reply to this thread?

We'd love to have you join the discussion, but first you'll need to login (or create an account).