FS: Vespa malossi cases and performance vespa parts

-used but still good vespa malossi case, crank, 19mm phbg+intake/reeds, cdi (I think simo) New gaskets and seals. $450 shipped

-new never installed 46mm Athena $100 shipped

-installed barely ran 42mm pinasco and head $180 shipped

-vespa homoet pipe, installed-needs rear bracket adjusted/welded to work for bravo/citta/grande-not sure if it would work on a ciao $110 shipped

-blue 4 star wheels-light flake, ks subframe in great shape (no cracks), kick start motor, cdi, stock top end, matching front wheel, stock runs good. (its on a euro spec bravo with factory pearlescent paint-will sell whole. Make an offer, has to be worth separating it from the bike and shipping rather than selling complete and running on CL.

-Rolling red citta frame/seat/forks/wheels subframe/motor $275 plus shipping

-stock vespa varios, top ends, cases, flywheels... make offer

will take a nice performance vespa crank for a stock case (mazzi, pinasco...), aftermarket variators (malossi or polini), or possibly a built stock case motor (drilled intake, 13.13, aftermarket crank, 43mm topend...) as partial trade but I would mostly like to have cash. Also interested in a nice grande.

Re: FS: Vespa malossi cases and performance vespa parts

bump

Re: FS: Vespa malossi cases and performance vespa parts

obo on the pipe and malossi cases

Re: FS: Vespa malossi cases and performance vespa parts

I’m interested but I need to see pictures of what you have for sale

Re: FS: Vespa malossi cases and performance vespa parts

I will post a pic of everything when I get a chance

Re: FS: Vespa malossi cases and performance vespa parts

pipe and pinasco gone.

Could use a cast iron 41-43mm kit, Olympia, dr, mallossi, polini..... 10pin

IMG_20150718_184228744.jpg
IMG_20150718_184216736.jpg
IMG_20150718_184212217.jpg

Re: FS: Vespa malossi cases and performance vespa parts

pic

IMG_20150718_184206211.jpg

Re: FS: Vespa malossi cases and performance vespa parts

citta, these are a blast. I am keeping one for myself and passing this one on. It is a pretty sweet base for a project. I will ship, uses standard bravo/grande subframe, I will ship at owners expense. Motor is 10pin needle bearing and seems to spin freely-I took the top end off to check the pin size hasn't been sitting like that for an extended time.

citta 1 - Copy.JPG
citta 2 - Copy.JPG

Re: FS: Vespa malossi cases and performance vespa parts

Bravo sold locally too.

Re: FS: Vespa malossi cases and performance vespa parts

Could also use a performance pipe, sito plus or circuit pipe for a a customers bike.

Re: FS: Vespa malossi cases and performance vespa parts

bump, trades, obo.....

Re: FS: Vespa malossi cases and performance vespa parts

^

Re: FS: Vespa malossi cases and performance vespa parts

^

Re: FS: Vespa malossi cases and performance vespa parts

cheap malossi motor, best way to build one, new this would cost a bunch more money

Re: FS: Vespa malossi cases and performance vespa parts

Blue four stars? What size?

Re: FS: Vespa malossi cases and performance vespa parts

16", no longer available-sold the entire bike

Re: FS: Vespa malossi cases and performance vespa parts

Pm'd

Re: FS: Vespa malossi cases and performance vespa parts

still for sale

Re: FS: Vespa malossi cases and performance vespa parts

pm me if you still got

Re: FS: Vespa malossi cases and performance vespa parts

This is what I have left:

-used but still good vespa malossi case, crank, 19mm phbg+intake/reeds, cdi (I think simo) New gaskets and seals. $400 shipped (previous owner ran 46mm polini)

-Rolling red citta frame/seat/forks/wheels subframe/motor $275 plus shipping

Re: FS: Vespa malossi cases and performance vespa parts

super discount over building a mallossi motor from new parts

Re: FS: Vespa malossi cases and performance vespa parts

Pinasco possibly still available.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account