This is for a special project, so unfortunately, I cant reference a specific bike. But here what I need:
A rear fender hoop bracket, looks like a U, where the bottom of the U bolts to the center of the rear fender in front of the taillight bracket, and the ends of the sides of the U typically bolt to the sides of the frame. Its really an anti-vibration brace for the rear fender.
Inside of the U needs to be 4.5" across, and overall length, from the base of the U to the end of the sides 6.5" long. If its longer, I can cut it down. The OD of the tubing should be 10mm or about 3/8".