Built this bike, and haven't even put gas in it.
Polini 64cc
4 petal reed
MLM 24mm intake
Mikuni TM24
Water cooled head
Polini radiator
Rito crank
Hpi mini rotor
3 shoe race clutch
Fast arrow Kickstart conversion
Weakends pipe
Ebr hydro front end
Aluminum rear "race" sprocket setup
Geared 19x44
Everything is new, and all wiring and electronics are hidden in the headlight.
I know I have some bucks into it, but I don't want to ride it. It's too clean.
Anyone want to buy it? It's one clean ride.
Absolutely gorgeous!
Ya its museum piece, custom bike show winner for sure
Holy hot damn!!!
Oh my.
wat
Very nice. Big carbs on polini's are great. I bet this thing would be a ton of fun on stock gearing. not to say its not fun with tall gearing, but short gearing on fast bikes is just so great.
Fork brace. Or front Fender.
I see it now, thee fork Brace,
My Bad.
How much (ballpark $ ) you need?
I have 2 Puchs to trade + $!
Pm please.
Thanks
Mike .
Chris HnRz Wrote:
-------------------------------------------------------
> Very nice. Big carbs on polini's are great. I bet
> this thing would be a ton of fun on stock gearing.
> not to say its not fun with tall gearing, but
> short gearing on fast bikes is just so great.
19x44-45 = 17x40 not real tall gearing at all
18x40, 17-18 x36 is tall gearing
Ken Roff Wrote:
-------------------------------------------------------
> Chris HnRz Wrote:
> --------------------------------------------------
> -----
> > Very nice. Big carbs on polini's are great. I
> bet
> > this thing would be a ton of fun on stock
> gearing.
> > not to say its not fun with tall gearing, but
> > short gearing on fast bikes is just so great.
> 19x44-45 = 17x40 not real tall gearing at all
> 18x40, 17-18 x36 is tall gearing
Sprocket Size don't matter
If I hang it on a Wall !
18 x 36 on the Green 7/77 I
Got's with me on this Trip,
Waiting fo the Nashville Ride ,
<just sayin >
Thanks.
Mike.
Thanks for the compliments. If you want to change the gearing, sportsman flyer can make you any size sprocket you desire for the rear--
Or, you can hang it on the wall if ya want to. Haha
Just saw this in person at Inverness, fuck, it's clean. I would assume this build for someone to buy done like this would cost at least 1500-2000. I would def pay 1500 for it without question. Good luck with the sale
Thanks Nick!
Check pm
Thanks .
Mike.
. (Nick) Wrote:
-------------------------------------------------------
> Just saw this in person at Inverness, fuck, it's
> clean. I would assume this build for someone to
> buy done like this would cost at least 1500-2000.
> I would def pay 1500 for it without question. Good
> luck with the sale
Kurt scooped that e50 from the you, Nick
It's on the Taildrager he building,
He fired I'd up last year , & that
Shit is Balls,But he won't sell
It to me!
MAXI NS SUX SO FUCKING OVER RAITED1 YOU DIDNT EVEN BOX IN THE REAR SWING ARM!
Agreed.
Totally overrated, sucky non-boxed in, shitty thing.
Thanks bud!
Hey Arthur, eat a bag of dicks
Sorry. I was a little drunk and bummed out that this was so fucking rad. I just bought a set of ssr lazer 5s and I m kicking myself for not have waiting and seen this. Or any other moped for that matter.
This Maxi N is really well put together. Done right!
GLWS!
Wanna trade for 2 laser 5s?
Haha!!
No. No thanks on the laser 5's. Too chineeeeeeee for me...
good lord that's beautiful.
Hey man, spoke to Kurt
He will send pic of thee 2
Puchs this evening .
Part of me wants to buy this thing, well a few parts of me want to buy this thing. I just don't want to spend the money it deserves...I could sell some stuff but that's annoying.
Sell stuff. Buy it. Haha
Bump!
2 g's.
Anyone?
Want to post in this forum? We'd love to have you join the discussion, but first: