fs: puch za50 factory tools w/shims

Here is a list of puch factory tools. These are nos/new. I took very good care of the tools. Yes, I used them twice! Still does not take from the value of the tools. These are being sold as a lot. No pieceing out. I am open to offers but not any low balling. If you plan on rebuilding za50 engines you will need these tools to set the engine to factory or better specs.

part #'s

905.6.33.1121

905.6.34.105.0

905.6.34.110.0

905.0.34.101.0

905.6.34.108.0 (e-50)

905.6.33.111.2

905.0.34.101.0

905.6.32.107.0

905.6.52.109.0

New spring steel shims, you will need shims to correct the new and old crankshafts. The shims go with the package deal.

17x24x.1

17x24x.2

10x16x.1

15x21x.1

15x21x.5

23x34x.5 (edited)

Picture 2015 (Medium).jpg

Re: fs: puch za50 factory tools w/shims

how much?

Re: fs: puch za50 factory tools w/shims

Please, use email Nick. If you need to know what these cost just look on ebay.

Re: fs: puch za50 factory tools w/shims

toomuch, ill jurry rig that shit

Re: fs: puch za50 factory tools w/shims

Words never better spoke.. and take it with these words of wisdom.

Pay To Play, "the moped game"

Thanks for the bump! (edited)

Re: fs: puch za50 factory tools w/shims

hey Ed

any measurement tools ?

you know, i need the small one and the big one

Re: fs: puch za50 factory tools w/shims

The measurement tools are !There in the boxes!

Leo, these tools are going to be sold all together. I refuse to sell these as pieces. (edited)

Re: fs: puch za50 factory tools w/shims

So what would be your best price?

Re: fs: puch za50 factory tools w/shims

Mel, You can send a email.

Re: fs: puch za50 factory tools w/shims

mmmmm e2o bearing puller want...............

Re: fs: puch za50 factory tools w/shims

Great will! Comes with all the other pieces included in the sell. :)

Thanks for the bumps guys! Hope these find a new home of a engine builder.

Re: fs: puch za50 factory tools w/shims

Mo Peds Wrote:

-------------------------------------------------------

> Please, use email Nick. If you need to know what

> these cost just look on ebay.

Those have been for sale for MONTHS at dilusional prices. not a relevant price comparison. It's the same guy who was trying to sell stock ZA's for $800.

These are worth some serious dough - but be real - the transmission holding piece isn't there. A complete set of factory tools sold for $550 + shipping on ebay earlier this year. It had everything for ZA's and e50s. EVERY tool mentioned in the manual.

Also, this, which was insanely cheap.

https://www.mopedarmy.com/forums/read.php?2,1270554 (edited)

Re: fs: puch za50 factory tools w/shims

Ryan, As always, Your 2 cents is heard dear. You don't need these tools cause your already a pro builder. :) cheers young chap. (edited)

Re: fs: puch za50 factory tools w/shims

Ryan, That was 2009, Tools don't lose value. Just so you know.

Please do not comment on my for sale ads.

Thanks very much,

ed

Btw, modest is good guy. If you had a old puch dealer ship and held on to your parts/tools .. you would be the same way. No your a young fellow and need not mind or take into account of age.

Thanks again, Ryan

ed

Re: fs: puch za50 factory tools w/shims

you got the tool that holds the transmission to remove the opposite threaded nut?

Re: fs: puch za50 factory tools w/shims

10 mm socket in front sprocket

Re: fs: puch za50 factory tools w/shims

I just bumped your thread, btw

Re: fs: puch za50 factory tools w/shims

^ that worked for me also.. but I did end up making a little tool for that ordeal.

Re: fs: puch za50 factory tools w/shims

Charles Cole (OFMC) /

This makes me feel real good, cause I got the whole set 4 years ago for about 500 bucks & felt I got lucky. It's not that much for specialty tools. Ever checked out how much Honda gets for their tools?

Re: fs: puch za50 factory tools w/shims

Here is the Tools (edited)

Re: fs: puch za50 factory tools w/shims

ttt

fine tuning

Sold

Tools are sold.

I still have some shims left. (edited)

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account