Bianchi Snark partout

Prices shipped. Motor seems fine, but the flywheel is dragging on something like the coil assembly on the inside. Dont care, just parting it out, make offer on motor

might have the tank around with a new petcock and also rear fender somewhere.

Spend 10 bucks and Ill throw in the little stuff for cheap if you need something like a cable/handle/kickstand/coil/pedal set/ etc.

Front Wheel - some rust, all spokes

Rear Wheel - some rust, all spokes

Not sure on the 14" wheels or whatever they are, they aren't super clean but all the hardware is there and in tact. Offer - No tires, they are going on another ped. Shippings about $13-16 per wheel usually

Shocks - so so buy with something or offer

Swingarm - $20 shipped

Seat - one seam has a stitch out, but its really nice, just faded.

Front Fender dent and scratches

Rear Fender - gotta go get it

Controls - buy with something else

Pipe - $45 shipped

Speedo - buy with something else maybe ~$15 shipped I suppose

Cylinder looks clean, has compression, should run $38 shipped

Forks - comes with bearings and cups yep yep !!!! $46 shipped

Rear chrome rack bars w/ hardware 2 pieces $18 - buy with something for cheep

Ignition Coil - buy with stuff

Motor - offer

Carburetor - sha 14.9 ? - $32 shipped - doesn't leak but thats all I know

Head - chunk of fin broken off but its quite small, new HG with it if I can find it $18 shipped

LMK through PM's, don't check email often.

this weekend ill be gone as well so expect delays (edited)

Re: Bianchi Snark partout

Emil Kniemel /

pm sent on the speedo, cable and drive.

Re: Bianchi Snark partout

seat is nice

Re: Bianchi Snark partout

Dibs on the triple tree, forks with headlight. sending email. (edited)

Re: Bianchi Snark partout

^ TY ^

& I Forgot to edit....

Speedo - the inner cable is broken

Seat - $25 shipped

Forks are pending.

Re: Bianchi Snark partout

Michael Domanski /

dibs on the controls, how much shipped to 49525

Re: Bianchi Snark partout

pm'd

Re: Bianchi Snark partout

Cool fork nut, says something? dont know why

Gas tank - $45 shipped w/ new Motobecane petcock that fits is included from treatland

Floorboards - $20 shipped

Aforementioned seat. The white spots likely can be cleaned up - It ain't bird poop though ( one on back one on front )

rear fender is up for sale also -

Ill have to get a shipping quote. Shipping + $8

Forks are likely sold but here is some specifications off of them

The total fork tube is 7in long, as if that helps... Snark head tube is about 5 3/16in long. The setup can sandwich from about 4 1/2 to 6 1/2in if thats how it works? (I'm not a fabber )

Minarelli v1 Fan / shrowd

Ill send the whole setup off the motor. Both sides of the housing for the flywheel and the fan off the flywheel.

I must be a photographer, and imageshack hates me.

Re: Bianchi Snark partout

darn, well anyone else have another set of straight snark blue forks, that are not siezed. drop me a email if so. Thanks, ed

Re: Bianchi Snark partout

Deezy has a Bianchi I think ;P

Pictures of the bucket - Sold

Re: Bianchi Snark partout

oah yeah, my PP addy is different than the one posted in my profile!

Re: Bianchi Snark partout

Buckets not sold! up for sale $18 shipped all packed up.

Re: Bianchi Snark partout

Forks - pending

carburetor - pending

fan shrowd - sold

controls - pending

Re: Bianchi Snark partout

Arnie Sparaco /

how much for stator plate?

Re: Bianchi Snark partout

Arnold Sparaco Wrote:

-------------------------------------------------------

> how much for stator plate?

it is rubbing on the flywheel & I welded. D will sel only w/ motor. Make offer

Re: Bianchi Snark partout

Parts sent out today.

Carburetor

Fan cover dealie thing

forks

Re: Bianchi Snark partout

Intake also for sale

Re: Bianchi Snark partout

Headlight / tail sold

Re: Bianchi Snark partout

Well those parts are all shipped out.

Anyone else want something?

DEEZY ?!?!?!?!

Re: Bianchi Snark partout

hahhaa, sorry man, I will need some someday, but I'm a ways away from my Bianchi project. I could use a top end for a V1, and eventually wanna decent carb for it.

Re: Bianchi Snark partout

I wouldn't mind having the bottom end. How's that starter plate look?

Re: Bianchi Snark partout

Tank still available? Wonder if that would fit on a City Bike?

Re: Bianchi Snark partout

With reference to the Bianchi Snark Wheels - Photos

And... Wheels may be pending

~ DeeZy Wrote:

-------------------------------------------------------

> hahhaa, sorry man, I will need some someday, but

> I'm a ways away from my Bianchi project. I could

> use a top end for a V1, and eventually wanna

> decent carb for it.

;P I just remember reading you had one but I see what you mean - You would definitely get a Deezy Discount if you do want something! Carbie is gone =[

Prancer B. Wrote:

-------------------------------------------------------

> I wouldn't mind having the bottom end. How's that

> starter plate look?

I am done with it, the stator plate rubs on the flywheel. I got spark out of it but the thing didn't run and I think its because of the whole setup. The flywheel may not even be a V1 flywheel, or the stator plate. I had it hardwired and it wouldn't run.

Kinda Hot and bothered at it! Probably should have just bought another V1. Don't know if the previous owner bent the crank or something stupid. I dont know about these v1's never played with them and this was a bad experience.

DAS Riot Wrote:

-------------------------------------------------------

> Tank still available? Wonder if that would fit on

> a City Bike?

Tank still available sir! PM me if your interested in buying or need any more phoots. Its rusty inside though - Dont recommend running it as is! New petcock though.

Re: Bianchi Snark partout

Ready to sell moar parts

Re: Bianchi Snark partout

ttt

Re: Bianchi Snark partout

Anyone want the motor!? Its taking up space in my garage.

$50 shipped?

It ran but barely. Should be low mileage, but I don't know why its acting so funny. Ignition related problem with the broken stator coil assembly.

Re: Bianchi Snark partout

🇮🇹💦 Of the Loin /

do you have the little wierd knarps that go in the WHEEL END of the brake cables?

my snark is missing those.

Re: Bianchi Snark partout

is that a 2peice exhaust/muffler that would fit an MO1? im really only looking for the muffler piece. how much shipped to 94124?

Re: Bianchi Snark partout

Eric Book Wrote:

-------------------------------------------------------

> is that a 2peice exhaust/muffler that would fit an

> MO1? im really only looking for the muffler piece.

> how much shipped to 94124?

It drops out to the passenger side about a few inches and goes straight back, yep two pieces / slider design. No idea on fitment ;P I dislike this Minarelli stuff because of this bianchi

The Legend Of Swagger Vance Wrote:

-------------------------------------------------------

> do you have the little wierd knarps that go in the

> WHEEL END of the brake cables?

>

> my snark is missing those.

Want to put those with the wheels, I see they are on there though. But for the other people who get them ill ask if you can have em.

Re: Bianchi Snark partout

I'll take the motor for $50 shipped. Consider it sold. I'll message you.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account