puch internal coil + za50 crank FS

Overpriced Parts /

German made Euro internal points ignition stator used, looks good but I never ran it though, two leads for hard wiring 24.00+6.00 shipping*

za50 crank clean,very good shape, low miles, good bushings, good bearings from 2hp non oil za50 36.00+12.00 shipping* *USA

photo(120).JPG

Re: puch internal coil + za50 crank FS

Overpriced Parts /

Bump

Re: puch internal coil + za50 crank FS

These ignitions are sweet I have one and it helps the mess of wires a little.

Re: puch internal coil + za50 crank FS

6v or 12v?

Re: puch internal coil + za50 crank FS

Overpriced Parts /

This is not a treats stator

It's a stock puch one

6v

Re: puch internal coil + za50 crank FS

roff what size is the crank end bushing on this one? i have two small id clutch bells that need a corresponding crank

Re: puch internal coil + za50 crank FS

Overpriced Parts /

Tammie looks like 10mm to me not counting flat part

closer picture

photo(122).JPG

Re: puch internal coil + za50 crank FS

darn! thanks anyway. thats the same size one i have at present

Re: puch internal coil + za50 crank FS

Overpriced Parts /

Za50 crank still available

Re: puch internal coil + za50 crank FS

Overpriced Parts /

good crank

Re: puch internal coil + za50 crank FS

Overpriced Parts /

,

Re: puch internal coil + za50 crank FS

Smaller ??? Someone ought to mention this in the wiki!!!

P1040178.JPG
P1040182.JPG

Re: puch internal coil + za50 crank FS

And make a crank shim.

Re: puch internal coil + za50 crank FS

is crank still available?

Re: puch internal coil + za50 crank FS

Overpriced Parts /

No but give me a few days and I may have another one

Re: puch internal coil + za50 crank FS

stock crank available?? and stock flywheel?? both for za50?? let me know if you do... thanks buddy!

Re: puch internal coil + za50 crank FS

Overpriced Parts /

No but I may have a crank/parts za50 in a week or two

Re: puch internal coil + za50 crank FS

Please, keep me in mind and let me know... I have cash anytime for parts.

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account